Feature
●Port Number:2/3/4/5;Terminates 28-12 AWG;Rated Voltage:250V/4KV;Rated Current:32A;Wire Crosssection:0.08-4.0mm²(Hard wire), 0.08-4.0mm²(Soft wire).
●Wiring length:9-10mm;Shell Material:flame-retardant nylon PA66;Guide Strip: Electrolytic copper(Surface tin plating);Spring:Nickel chromium alloy steel
●Selecting the best flame retardant insulating material,which is long life,no corrosion,anti-aging,pressure 4KV and against electrical shock.There are test holes on the back of the connector to check if the wires are powered on.
●These reusable connectors make the job much easier and neater,technological innovation reduce wiring time by 70%.Just pull up the pull rod,pull out the wires,and replace them.
●Packed in a box.Lever Wire Connector 88PCS (2Portsx50Pcs;3Portsx24Pcs;4Portsx9Pcs;5Portsx5Pcs)and fixed base and screws.suitable for wire connection,widely used for fans,lighting,and all small appliances.
[75Pcs]
[45PCS]
[88Pcs]
Description
Which can connect multiple sets of wires, freeing up a good amount of spacea and times,
They are compact, super easy, reliable and reusable.
Selecting the best flame retardant insulating material, which is long life, no corrosion, anti-aging, pressure 4KV and against electrical shock.
Lever Wire Connector
How to use:
- First snap the upper part of the fixing frame into the terminal test hole
- Then snap the lower part to the bottom of the terminal
- Bracket: good resilience, not easy to break, more secure
Product description
- Rated Voltage: 250V/4KV;
- Rated Current: 32A;
- Wire Cross section:
0.08~4.0mm²(Hard wire)
0.08~4.0mm²(Soft wire)
- Shell Material: flame-retardant nylon PA66;
Guide Strip: Electrolytic copper (Surface tin plating);
Spring: Nickel chromium alloy steel
- Package：Lever Wire Connectors x 88PCS +Fixed Base x 55Pcs+Screws x 55Pcs
|
|
|
|
|---|---|---|
|
Terminal block holder : It can solve the shortcoming that the quick-connect terminal cannot be fixed and easy to fall off when heated. Shell Material: flame-retardant nylon PA66; Guide Strip: Electrolytic copper |
Wiring steps: Remove the outer skin of the wire for about 10mm In turn, open the handle of the connector and insert the wire into the hole. Press the handle down |
Boxed: A total of 198PCS
2 Ports(50PCS) 3 Ports(24PCS) 4 Ports(9PCS) 5 Ports(5PCS) 2. Terminal block holder （55PCS) 3. 3x10mm black screws（55PCS) |
Works with most common household wiring
|
|
|
|
|---|---|---|
|
|
|
|
