WEN MM1011T 15-Amp 10-Inch Single Bevel Compact Sliding Compound Miter Saw with Laser, Black
Remember when your miter saw could do it all? Create cuts at any angle with the WEN 10-Inch Single Bevel Sliding Compound Miter Saw. Our powerful 15-amp motor slices through even the hardest of woods, rotating the blade up to 4500 times per minute. This versatile saw miters up to 45 degrees in either direction and bevels up to 45 degrees to the left. Cut boards up to 12 inches wide and 3-1/2 inches thick or make compound cuts (45-degree bevel and 45-degree miter) in boards 8-1/4 inches wide and 2-1/5 inches thick. The saw features 9 positive miter stops: two at 15 degrees, two at 22.5 degrees, two at 30 degrees, two at 45 degrees and one at 0. However, if a more unique angle is preferred, the miter lock still allows the saw to lock at any angle between those stops. This spacious saw also features a 7-1/2-inch crown molding nested capacity and a 6-3/4-inch base board vertical capacity. The compact design makes for great portability and storage between uses. Measuring in at 17.5 by 28 by 16.5 inches, you’ll never have to worry about your rail system interfering with your wall again. This package also includes a 10-inch 40-tooth carbide-tipped blade (w/ 5/8-inch arbor), two table extensions, one clamp assembly, a class II laser guide, a dust port adapter, and a dust bag. The onboard laser illuminates the line of cut for maximum accuracy while the dust collection port allows for connection to either the included dust bag or your dust collection device of choice. And, because it’s a WEN product, your miter saw comes backed by a two-year warranty, a stocked inventory of replacement parts, and a friendly customer help line, all to make sure you remember WEN.
WEN JT630H 10-Amp 6-Inch Spiral Benchtop Jointer
Remember when you had a perfectly square jointer to flatten out your boards and workpieces? Maximize precision with the WEN 6-Inch Benchtop Jointer. Our spiral cutterhead utilizes 12 staggered HSS blades to provide a perfect finish to hard and soft woods alike, while the powerful 10-amp motor rotates the cutterhead up to 12,000 times per minute. Adjust the infeed table to remove 0 to 1/8-inch of material with each pass, with a reliable depth-of-cut scale for maximum accuracy. The spacious table measures in at 30 by 6 inches. Bevel the fence up to 45 degrees to create angled cuts along the faces of your boards. The spring-loaded blade guard helps protect against accidental injury, only exposing a limited section of the cutterhead during jointing operation. This package also includes two push blocks for safer jointing and an onboard dust port for minimal cleanup. Compatible with the WEN BP510H Replacement Spiral Blades. And, because its a WEN product. a stocked inventory of replacement parts, and a friendly customer help line, all to make sure you remember WEN.