WEN MM1011T 15-Amp 10-Inch Single Bevel Compact Sliding Compound Miter Saw with Laser, Black
Remember when your miter saw could do it all? Create cuts at any angle with the WEN 10-Inch Single Bevel Sliding Compound Miter Saw. Our powerful 15-amp motor slices through even the hardest of woods, rotating the blade up to 4500 times per minute. This versatile saw miters up to 45 degrees in either direction and bevels up to 45 degrees to the left. Cut boards up to 12 inches wide and 3-1/2 inches thick or make compound cuts (45-degree bevel and 45-degree miter) in boards 8-1/4 inches wide and 2-1/5 inches thick. The saw features 9 positive miter stops: two at 15 degrees, two at 22.5 degrees, two at 30 degrees, two at 45 degrees and one at 0. However, if a more unique angle is preferred, the miter lock still allows the saw to lock at any angle between those stops. This spacious saw also features a 7-1/2-inch crown molding nested capacity and a 6-3/4-inch base board vertical capacity. The compact design makes for great portability and storage between uses. Measuring in at 17.5 by 28 by 16.5 inches, you’ll never have to worry about your rail system interfering with your wall again. This package also includes a 10-inch 40-tooth carbide-tipped blade (w/ 5/8-inch arbor), two table extensions, one clamp assembly, a class II laser guide, a dust port adapter, and a dust bag. The onboard laser illuminates the line of cut for maximum accuracy while the dust collection port allows for connection to either the included dust bag or your dust collection device of choice. And, because it’s a WEN product, your miter saw comes backed by a two-year warranty, a stocked inventory of replacement parts, and a friendly customer help line, all to make sure you remember WEN.
WEN 61721 18-Gauge 3/8-Inch to 2-Inch Pneumatic Brad Nailer
Remember when you could build whatever you wanted? Nail nails and fasten fasteners with the WEN 18-Gauge 2-Inch Pneumatic Brad Nailer. Fire 18-gauge brads anywhere from 3/8 to 2 inches in length. Our spring-loaded magazine makes for quick and easy reloads with enough space to hold up to 106 nails. The lightweight body combined with the rubber-lined handle limit fatigue during long days on the job. Operating pressure ranges from 60 to 115 PSI with the nailer consuming 0.028 CFM of air per nail at 88 PSI. The 1/4-inch NPT air inlet allows for quick connection to your favorite air compressor. Adjust the firing depth of the nailer with the simple turn of the depth adjustment wheel. Check the number of remaining nails through the gauge window mounted on the side of the magazine. Unlatch the front nose to clear jams quickly and easily. Adjustable air exhaust lets users direct the pneumatic air output in any direction while the powder-coated finish prevents wear and tear to the nailer’s body. And, because it’s a WEN product, your nailer comes backed by a two-year warranty and a friendly customer help line all to make sure you remember WEN.