Feature

●【Vacuum Back Suction】: This semi-automatic glue dispenser machine is equipped with a vacuum back suction device, which can effectively prevent the glue from dripping during use to achieve a more accurate glue dripping, and ensure a clean and tidy working environment.
●【Quick Start】: This item adopts a high-quality electronic valve, which can instantly start the diaphragm valve and increase the working efficiency by more than 80%.
●【Precise Drip】: The minimum drip volume is 0.01ML, and the spitting interval is 0.1-9.9s. It can drip precisely and achieve a repeat accuracy of about 0.5%. It is also equipped with a single-hole hand control switch, allowing you to control it personally by hand for more accuracy and timeliness.
●【Semi-automatic Design】: It can be both automatically dripped by the machine and precisely controlled by a single-hole hand switch. If you want to free your hands, you can set the switch to the automatic position, to achieve a more efficient and higher-quality working method.
●【Stable Voltage Change】: Features a high-end all-copper coil transformer, which can stabilize the voltage change and increase the service life, and can be used in high-frequency and high-intensity work scenarios, improving operational safety while being efficient and energy-saving.


Description

Specification

Color: Black

Model: 982

Material: Metal

Spitting Mode: Manual / Semi-automatic

Minimum Drip Volume: 0.01ml

Spitting Time Interval: 0.1-9.9s

Automatic Timing(Can Be Set): 0.01-30s

Repeat Accuracy: ±0.5%

Internal Voltage: 12-24DC

Input Air Pressure: 2.5-7bar(35-100psi)

Output Air Pressure: 0.1-5.5bar(1-78psi)

Power Supply: 110V AC, 60Hz

Power Consumption: 20W

Plug Specification: American Standard 110V

Product Size:23*15*6cm/9.05*5.9*2.36in

Package Size:20*26*14cm/10*9*12.5in

Gross Weight: 2.1kg/4.63 lbs

Package Included

1* Dispenser Main Unit

1* Manually Switch

1* Foot Switch

1* Air Tube

1* Connection Tube

1* Power Cord

1*Dispenser Stand

2* 30CC Liquid Barrels

6* Dispensing Needles

1* Chinese and English Manual

Notes:

1.The input high pressure should not exceed 7 bar (100psi), and the maximum working pressure of the glue dropper should not exceed 5.5 bar (78psi). If the working air pressure is above 4 bar, please switch to aluminum connectors.

2.If available, store all materials at a constant temperature (5°) as directed to ensure that the concentration does not change significantly during use.

3.When the material concentration is too large (flow difficulties), can not drip, if you want to use it, according to the manufacturers instructions dilute the use; before work, the material must be fully stirred evenly to ensure that the size of the drip consistent.