Feature

●TP-50 Glue Dispenser Machine - Packing List: dispenser mainframe x 1, Teflon tube dispensing pen x 1, Teflon tube x 1, foot switch x 1, power cord x1, instruction manual x 1.
●The Peristaltic Point Glue Machine Power supply: AC110V+/-10% 60Hz; Power consumption: 30VA; Speed: 0~200rmp; Adjustment range of spit out glue: 0~999.9.
●The anaerobic glue machines adjustable range in suck back glue: 0~400; Minimum spit out glue: 0.0001ml; Applicable material viscosity: below 10000ps.
●There are two modes of use: discharge mode, stable operation mode (quantitative discharge), manual control mode.
●Shipping & Service: We packed the item as good as we can. If there is any question, please tell our after-sales team, and we will provide the most professional and timely service.


Description

Product Parameters:

Power supply: AC110V+/-10% 60Hz

Power consumption: 30VA

Speed: 0~200rmp

Adjustment range of spit out glue: 0~999.9

Adjustable range in suck back glue: 0~400

Minimum spit out glue: 0.0001ml

Applicable material viscosity: below 10000ps

Product Features:

There are two modes of use: discharge mode, stable operation mode (quantitative discharge), manual control mode

Packing List:

dispenser mainframe x 1, Teflon tube dispensing pen x 1, Teflon tube x 1, foot switch x 1, power cord x1, instruction manual x 1.

Operation Method:

Manual mode:

1. Install the machine, connect the power cord, and power on, find the switch from the position, the indicator light.

2. Install the Teflon tube.

3. Set forward and reverse to use CW and CCW keys for conversion. We select CCW key for conversion, and we select CW key for clockwise rotation.

4. Set the back suction VAC ADJ to turn forward and reverse to select the required value. It is best to use manual mode to turn off the suction when reversing.

5. Adjust the DIS and ADJ knobs to set the best speed (the best speed for work is 50~120RM).

6. Press the "SHOT" button, or manual switch, foot switch to complete the job.

Automatic mode:

1. Turn the switch to the TDC position, the indicator light is on.

2. Use the DISPERSE TD heart button to set the dispensing angle.

Work according to the above manual mode 2, 3, 4, 5, 6 program.

Note:

In the state of counterclockwise rotation, the (nS T) key changes to the amount of sucked back power.