The flexible magnet strip is magnetic on one side and can be easily repositioned on flat or slightly curved steel surfaces. The 100 roll is pre-scored every 4" (297 total pieces) to snap off easily, with a tolerance of + or - .060". The strip has a small groove to identify the non-magnetic side. The strip withstands temperatures from -15 to +160 degrees F.
Flexible magnets can be easily cut and shaped for a range of applications. They are produced by mixing powdered iron or ferrite with a rubber or plastic binder, and then extruding or rolling into the desired shape. Flexible magnets can have adhesive backing and be laminated with a printable vinyl coating. Flexible magnets are typically magnetized with multiple poles on one surface to generate a stronger holding force. High-energy flexible magnets can sometimes be used in place of ceramic materials if tight tolerances are not required. The application temperature range is determined by binder material properties.