HIGH QUALITY, LIGHTWEIGHT & EASY TO USE

Our high quality mini bike pump with gauge is a design masterpiece that’s easy to use and delivers fast & accurate inflation when you need it the most - so you can get back quickly to the joy of your ride.

Pump bracket included to mount the pump onto your bike frame for convenient and easy access when you need it. Pump handle ‘snaps’ into the bracket and is further secured with the extra rubber security strap. Bracket requires holes in bike frame to install on a bike frame. Bike bolts already supplied with your bike are suitable for installation and should be used to secure the bracket onto the bike frame. Due to its small size, the pump can also be stowed in a cycling jersey back-pocket or back pack.

Pump dimensions: 8.75 inches (22 cm) long, 1.5 inches wide (3cm).

To understand how to use our Mini Bike Pump with Gauge, please check out our How to and FAQ videos in the video shorts section.

FLEXIBLE HOSE WITH INTEGRATED PRESSURE GAUGE

Our innovative flexible hose with in-line pressure gauge is cleverly stored inside the handle and barrel of the pump to maximize compactness. The flexible hose design takes the stress off the valve stem and attaches securely to ensure no air can escape during inflation.

The pressure gauge readout starts at 20 psi (full line), then 30 psi (half-line), then 40 psi (full line) and so on up to 100 psi. As such the gauge is not suitable for low pressure tires e.g. fat tires.

The hose valve head should be screwed down ‘deeply’ onto the tire valve, this, in turn, creates a full seal allowing all the air to be pushed through when pumping and the gauge will rise accurately and smoothly.

PRESTA & SCHRADER COMPATIBLE

Designed to work with threaded Presta & Schrader tire valve types. Each end of the pump hose features specific valve heads for Presta & Schrader for a great tire valve connection with no leaks when pumping. No adapters needed!

For Presta valves with removable cores, extra care should be taken to tightly screw the core into the valve stem so it’s nice and snug - you can either use pliers or a valve core tool to tighten the core. This process is the same when using this type of valve with any type of bike pump or CO2 inflator. Presta valves with removable cores are primarily designed if you use valve extenders or use a tire sealant such as slime’. Bike pump is not compatible with valve extenders.