The package contains 2 pieces of product. It is produced exactly to the specified brand and model, it provides a perfect fit. It is made of stainless steel material. It has a 5-year warranty against corrosion. It is made of 1st Class 304 stainless steel material, which offers the highest visual and durability. Thanks to the high quality double-sided acrylic tapes on it, it offers practical and easy installation without damaging the vehicle. For products that require adhesive reinforcement, silicone is also sent in the box. Before assembly, pay attention to the steps and warnings in the assembly instructions in the box. Adhesive booster (Primer) is sent in the box. All products have ISO 16949, ISO 9001:2008 and TUV-CERT certificates. Assembly Instruction: Install in a dry and dust-free environment. Before the assembly, perform an assembly exercise in the area where the double-sided tapes on the part will be applied without opening the protector. The surface on which the product will be adhered should be treated with spirit, alcohol, cellulosic thinner, etc. Clean it meticulously. Silicone, gasoline, cologne etc. Do not clean with additives and oily substances! In order to fully show the features of the double-sided tapes, which are sent on the product as ready for assembly, a hair dryer, etc., should be applied to the surface to be mounted. apply heat. Apply the Primer wipe included in the box to the cleaned surface. Be careful not to apply outside the area where the product will be adhered. Apply your product at once by removing the protective surface of the double-sided tapes on the cleaned and heat applied surface. After the application, apply pressure with the help of a cloth to ensure that it adheres well. Make sure that no water comes into the relevant area for 24 hours.