Made of 304 Stainless and Brass Elbow with surface treatment,All fittings are 1/2 inch NPT male threads,1/2" Female or Male (with included adapter) NPT on Burner Side and 1/2" Male NPT on Incoming Side
DO NOT PUT THE HOSE CLOSE TO THE COOKING AREA,Hose Working Temperature Range: -22°F~122°F. High Temperature will cause Hose melt or Fire incident. Propane Fire Pit/Fireplace Parts Gas Control Valve System regulator valve with hose Low pressure QCC1 connection propane regulator with hose 3Ft 1pc 3/8" female flare thread control flame failure safety valve 1pc with knob 600mm Universal M8 thermocouple 1pc 24" Whister free flex line 1 pc All parts can be directly connected, CSA approved parts Valve and thermocouple Operation Instructions
1). Fix the valve on a plate or board of your grill or fire pit by the head screw and flange.
2). Connect your inlet and outlet hose on inlet and outlet side. (faston it tightly enough in case of gas leakage)
3). Faston the thermocouple nut M8 on the valve end tightly (Check if your valve end thread if 8mm before you buy)
4). Connect thermocouple and end thread well
5). Open gas by correct size knob and push your valve around 5-10s till the thermocouple head is heated enough.
6). Release your hand and it work properly If when you release hand, gas valve shut off again, Please check
a. If your thermocouple is always be heated on flame
b. If the thermocouple end is well connect with valve
c. If the inlet and outlet side well connect with hose you have Tips: The regulator hose and corrugated hose should be well connected when using. Must obey above valve and thermocouple operation instructions then this system can be worked perfectly.