Feature

●Rebar Tier is a small electric hand-held machine with safe and reliable features for fast packing of steel bars. Usually used in the construction market, including civil buildings, ground pipes, floor heating nets, steel bars, etc.
●Take out the binding thread, tear open the packaging film, pull the straight thread out about 10 cm, load it into the binding machine in a clockwise direction, and put the thread into the guide tap tube. Note: When tearing off the packaging film, please hold the line plate tightly and do not let the line loose. If the wires are scattered freely, it will cause the wires stuck on the wire board to unravel.
●1. The jaws of the reinforced tire are stuck at the intersection of the steel bars, and the steel bars are hooked at a 45 degree angle. Note: There should be no obstacles between the jaws and the line. 2. Press the start switch, the reinforced tire machine will work (rotate, hinge tight, cut off) Note: Press one button at a time and do not probe the jaws while working.
●1. When in use, after lashing at 45 degrees to the left, the next lashing is 45 degrees to the right, lashing alternately from left to right. 2. When the machine is about to tighten, the machine will shake slightly. Do not hold the machine too tightly, just relax it appropriately.
●1. Regularly clean the machine and keep the line opening clean. 2. This product cannot be placed randomly to avoid damage to the parts. 3. Do not put the battery and other metal objects together to avoid short circuit. 4. Non-professionals should not disassemble the machine at will to avoid damage.


Description

Specifications:

Color: Orange

Material: Plastic + Metal

Voltage: 12V

Battery: 12V Lithium Ion Batteries

Battery Capacity: 13200 Mah

Battery Charging Time: 1.5 hours full filling

Tying Wire Diameter: 0.8mm

Tying Wire Length: more than 110 m

Applicable Scope Of Steel Strapping: 30mm - 60mm

Knot Wire Length: 40cm and above

Knot Number Per Charge: 3000 times

Knot The Required Time: 0.8 seconds at a time

Cable Length: 95cm / 37.40(appr.)

Box Size: (L)X(W)X(H) 42X30X10cm / 16.54X11.81X3.94(appr.)

Machine Size: 290 mm * 65 mm * 195 mm / 11.42x2.56x7.68(appr.)

Charger Plug: China national standard plug (we will send you the suitable adapter according to your location)

Features:

Brand New and high quality.

1. Compact size, lightweight, easy to grab.

2. It can save 3-5 times than man power by hand.

3. Rebar Tier is a hand held machine used to pack rebars quickly.

4. It is a miniature motor tool has the trait of safety and credibility.

5. Used for building market, including civil building, floor pipe, heating floor mesh, steel bar, etc.

6. Reasonable structure, advanced craft, simple and convenient operation, high efficiency and convenient maintenance.

Maintenance:

1. Clean the machine regularly, keep the wire mouth clean.

2. This product can not be placed randomly, so as not to cause damage to parts.

3. Batteries must not be placed together with other metal objects to avoid short circuit.

4. Non-professional do not disassemble the machine arbitrarily, lest cause damage.

5. When you encounter an unresolved failure, please give it to the professional repair.

Package included:

1X Tying Machine

1X Pliers

1X Charger (we will send you the suitable adapter according to your location)

1X Storage Box

2X Lithium Ion Batteries