Feature

●【Compatible Models】Igniter push button switch compatible with Weber Spirit E/S-210, 220, 310, 315, 320, 330 gas grills with front-mounted control panels(2013 and Newer). NOTE: NOT fit for any Weber Genesis series grills.
●【Replacement Part Number】Grill igniter push button replacement part is 7642,7643,69850,69851.
●【Function】The ignition switch merely has an on/off switch function and no igniting capabilities, and must be connected to other components in order to function, which can alleviate the problem of the grill not working due to switch failure.
●【High-quality Material】This grill igniter switch has a top made of nitrile butadiene rubber (NBR), which is used for a long time in heat and oil, and more electricity than ordinary rubber. Middle surface is chrome-plated and outer shell is plastic, which made the switch waterproof, light in texture and durable.
●【Quick Installation】Simply remove the front control panel with a screwdriver, and removed two connectors from the back of the old ignitor. Then placed the new ignitor in place and connect the wires, and replace the front control panel.


Description

Package:1x Igniter Switch

Part Number:7642、7643、69850、69851

Compatible with

Weber Spirit E/S-210, 220, 310, 315, 320, 330 gas grills with front-mounted control panels(2013 and Newer)

Weber Models:

46010074 46100001 46110001 46112001 46113101 46410674

46500401 46502001 46502401 46510001 46512001 46512401

46513101 46810002 46912401 47100001 47110001 47112001

47502001 47502401 47510001 47512001 47512401 47513101

47912401, GENESIS SPIRIT E-310, GENESIS SPIRIT S-210, SPIRIT E-210 SPIRIT E-210 CLASSIC, SPIRIT E-215 SPIRIT E-310, SPIRIT E-310 ORIGINAL, SPIRIT E-315, SPIRIT E-330, SPIRIT S-210, SPIRIT S-315, SPIRIT EX-315 SMART GRILL, SPIRIT EX-325S SMART GRILL, SPIRIT SX-315 SMART GRILL, SPIRIT SILVER E-310, SPIRIT SP-310, SPIRIT SX-315.

Weber Models:

46310001 46700401 46710001 46800401 46802101 46810001

46810099 46812001 47700401 47800401 47802101 47812001

SPIRIT E-220, SPIRIT E-320, SPIRIT E-330, SPIRIT E-335, SPIRIT SP-320, SPIRIT SP-330, SPIRIT SP-335.

NOTE: NOT fit for any Weber Genesis series grills.

Installation:

1. Using a screwdriver, loosen the screws that hold the panel in place and tilt the panel.

2. Disconnect the two wires behind the old ignition switch.

3. Replace the igniter button switch with a new one.

4. Reconnect the wire to the igniter switch, and replace the front control panel.

Notice:

1) Please refer to your owners manual and check dimensions with your original parts before ordering.

2) The package simply includes the ignition switch, no wiring or batteries.

3) If it didnt work at first, please remove the battery, check the voltage, and reinstall it, and it should work.

4) The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

5) Please allow slight manual measurement deviation for the data.