Feature(may vary by option.)

●Product Introduction:120W, strong power output, the maximum lift is 80m.The theoretical value of pump can 10L/m.
●Product Introduction:120W, strong power output, the maximum lift is 80m.The theoretical value of pump can 10L/m.
●The product is compact and easy to install.
●120W, strong power output, the maximum lift is 130m; the theoretical value of pump can 10L/m; Vertical suction: 1.5m.
●Compact Construction:The product is compact and easy to install.

[12V 3210YD-12-120FS]

Description

Specification:
Voltage: 12V/10A; 24V/5A(Optional)
Maximum power: 120W
Maximum pressure: 13KG
Working pressure: 8G
Opening : 10L/m
Vertical suction: 1.5m
Lift: 130m

Package list:
1 * Pump
1 * Filter net
1 * Handle of pump
3 * Installation screw
1 * Spare

Note:
The actual product color may deviate from the photo due to light.
There may be a slight deviation in the measurement of product.

Operation guide:
1. Connect the pump to the inlet and outlet pipes. It must be ensured that the connection between the inlet and outlet pipes and the pump is tight, otherwise it will cause low pressure or water leakage. (Hint: there are arrows on the pump cover to indicate the direction of water in and out, and the direction of the is the direction of water discharge)
2. Install the filter at the inlet end, and the filter density is preferably above 80 mesh. (ie, 80 holes per square centimeter)
3. Connect the micro diaphragm pump to the motor. The electrical parameters of the connected power supply must meet the input requirements of the motor.
4. Turn on the power and the motor pump starts to run.
5. The water is discharged for 5~10 seconds, drain the air in the pump and the pipeline. After the water is stable, temporarily turn off the power and connect the water or pump head.