Feature

●13GPM Powerful Pump: The 2-stage pump can give you faster cycle times and higher possible pressure with a small engine. Excellent for use on log splitters, 85% efficient.
●Parameter:Shaft: ½",Inlet port: 150mm/5.9inch, Outlet port: 230mm/9inch, Minimum 8 HP or larger gas engine., For use with open center hydraulic systems only, Maximum pressure: 3000 PSI, Bolt circle: 2.83in.
●Sturdy ＆ Durable: The high-strength extrusion aluminum casing enables the pump to resist impact, rust, and high pressure. This sturdy structure can prevent leaks and ensure a prolonged service life.
●Simple Installation: This pump stands out with a 4-hole bolt-on design, and it allows for a direct and quick installation. Install the pump effortlessly, making your log splitting more effective and robust.
●Doesnt Just Split Logs: The 2-stage hydraulic pump is excellent for log splitters, press, machine tools, and power units for snowplows.


Description

Widely Application:

Very suitable for power devices of fellers, presses, machine tools, and snowplows.

Specifications:

New Hydraulic Log Splitter Pump 13 GPM

Shaft: ½"

Inlet port: 150mm/5.9inch

Outlet port: 230mm/9inch

Minimum 8 HP or larger gas engine.

For use with open center hydraulic systems only

Maximum pressure: 3000 PSI

Bolt circle: 2.83in.

4 holes spaced 2"" on center

Mounting hole diameter: 344in

Woodruff key: 1/8in

Rotation is clockwise

This 2 stage pump can give you much faster cycle times and higher possible pressures with a small engine. Excellent for use on log splitters. 85% efficient.

The HI/LO section of the pump is all aluminum and the end plates are cast steel. Applications for the HI/LO pump are log splitters, presses etc where rapid movement of the cylinder at low pressure is required prior to automatically switching to the high pressure mode to meet load requirements.

Packing Include:

1 PC 13 GPM Hydraulic Log Splitter Pump