Feature

●?Automatic Induction Protection: Protect your electrical devices by interrupting the current flow from voltage spikes, instant surge, voltage fluctuation, brownout, and that voltage which are too high or too low.
●?Delay Function: If the device encounters (electric power) voltage fluctuations, it will protect the appliance by providing the output until the voltage stabilizes. The “DELAY” indicator would be turned on to inform its user. The appliance would be delayed for 3 mins to confirm that the voltage is stable so that it could be re-established.
●?Working Principle: As there is an interruption in the current flow, the Voltage surge protector gives an interval of 3 minutes to allow the voltage to stabilize. Additionally, the Voltage surge protector provides protection against voltage spikes that can damage electrical equipment.
●?Applicable Equipment: The voltage (surge) protector suit for Air Conditioners, Freezers, Ice Makers, Washing Machines, or any Large Appliances.
●?Adjustable Voltage: The minimum voltage capacity of the protector is adjustable. It can be adjusted according to your needs. ??Under Voltage:170V-185V(Adjustable) ??Over Voltage:255V-270V(Adjustable)

[220V 1 PACK]

[220V 2 PACK]

Description

BSEED Wiring Power Surge Protector, Adjustable Voltage Regulator with Light Indicators

Over/Under Voltage Protection

Lightning Protection of the Voltage Protector

Instantaneous voltage exceeds the limit, the product will protect the appliances against excessive voltage damage automatically and quickly. When the voltage exceeds the limit, it will automatically cut off the power to prevent the electrical appliances being damaged for too low or too high voltage.

High Quality Wall Surge Protector

750 Degrees High Temperature Resistant

The heavy duty surge protector is durable. Germany bell plastic shell. The level where V0 flame retardant. Hardware is 0.7 thick beryllium bronze. Flame retardant materials reach the level test experimental standards of UL94-5VA. Protect your home.

The whole house surge protector is suitable for most electrical appliances

Details of the Appliance Surge Protector

>>>> INSTALLATION INSTRUCTIONS AND SPECIFICATION OF THE SURGE PROTECTOR >>>>

Disconnect the power from the main breaker box before installing the 220 Voltage Protector to the air conditioner or refrigeration equipment. Remove the terminal cover to access the input/output connections.
Identify the 2 power lines and ground from which the air conditioner will be connected and install them to the IN terminal of the protector as shown in the diagram below.
Identify the 2 lines and ground for the air conditioner equipment! and connect them to the OUT terminal of the protector (see diagram below).
Install the cover of the electrical terminals back to the equipment and reconnect the power from the main breaker box.
Turn on the protector by using the lateral switch. In normal conditions the yellow indicator (security code)will turn on. Wait 3 minutes for the security cycle (yellow LED), the normal (green LED)will turn on energizing the air conditioning unit. Voltage: 220V/60HZ. Time Delay: 3-4minutes. Input Connection: L1-L2-G. Max Ambient：45℃. Output Connection: G-L1-L2.
Phosphor Bronze: with good electrical conductivity, corrosion resistance and wear resistance. HVP：258V±2V. HVP R：255V±2V. LVP：165V±2V. LVP R：168V±2V.
GREEN LED: NORMAL: It will remain green as long as the equipment is functioning normally.
YELLOW LED: SECURITY CYCLE: The yellow light will turn on for 3 to 4 minutes after a voltage fluctuation or power outage.
RED LED: OUT OF RANGE: The light will turn red when there is no electrical power to the equipment it is protecting. The red light will tum off when the voltage reaches an acceptable range.
Voltage protectors are used when volt./current surges beyond rated value. These units quickly cut power to avoid damage or even fire within your refrigerators, air conditioners, heaters, coolers, freezers, etc.