Feature

●[RELIABLE WORKING] Normally open 6 wire high accuracy tool setting instrument with 8mm stroke and 0.001 mm positioning accuracy. Contact life up to 3 million times, contact force 1N.
●[STABLE IN OPERATION] Tool setting instrument does not require a built-in amplifier and avoids deviation caused by temperature and power voltage fluctuations. Achieves stable operation.
●[SMART ALARMING] When overtravel alarm exceeds the stroke, an alarm will be issued. Can directly input to NC and programs, with stable performance.
●[WIDE APPLICATION] Use for tool measurement, wear and tear detection, tool breakage detection, etc. on CNC machine tools, engraving and milling machines.
●[GREAT DURABILITY] Dustproof and waterproof structure preventing coolant and iron filings from flying. Still has good durability.

Description

Specifications:
Item Type: Touch Tool Setter
Model: M26D-30-1
Voltage: DC 24V
Line Length: The length of the standard line is 5m / 16.4ft(approx.), with a protective tube length of 1.5m / 4.92ft(approx.). There may be a small error in the manual measurement.
Output: NO, normally open.
Knife Facing: Approx. 30mm / 1.18in
Stroke: Approx. 8mm / 0.31in
Repetitive Accuracy: 0.001mm under 50-200mm per min operating speed.
Contact Life: 3 million times.
Waterproof Grade: IP67
Contact Force: 1N for vertical installation.
Cutting Material: Tungsten Steel Superhard Alloy
Treatment: Grind the mirror for 4 seconds
Contact Rating: DC 24V 20mA maximum, and the recommended value is 10mA resistance load.
Indicator Light: Normally open LED light on, normally closed without LED indication during operation.
Alarm: Overtravel alarm .

How to Use:
Direct installation and use.

packing list:
1 xTouch Tool Setter

Note:
1. Try to install it in a place with less iron filings and splashing on the workbench.
2. It must be installed vertically to ensure a flat bottom to avoid excessive accuracy errors.
3. After the wiring is completed, place the tool setting instrument in another place on the tool setting seat, test that the tool setting is normal, and then fix it in the correct position.
4. Please use it correctly within the rated DC 24V ± 10% 20mA maximum power range to avoid overloading and burning internal components.
4. The tensile strength of the power and lines is below 20N, that is, 2KG, and the bending radius of the metal tube of the power line sheath is R7.
5. If you need to use the blowing function, the outer diameter of the trachea should be 4MM, the inner diameter should be 2.5MM, and the recommended air pressure should be 0.3?0.6MPA.
6. Please control the diameter of the tool to be less than 20mm.
7. Control the