[40 Ft White]
[20 Ft Grey]
[40 Ft Black]
Note: When the temperature is below 20 degrees, use a hair dryer to preheat the back glue for the best effect.
|
|
|
---|---|---|
Super Strong adhesionThis Vinyl Wall Base come with super sticky self-adhesive tape. It can keep you sticky for a long time. During the installation process, using a hot air blower can achieve the best viscosity effect. |
Durable and FlexibleThis wall trim are made of high-grade PVC materials. Durable, Green, tasteless.Flexibility is a feature of this product. It can be applied to various scenes, arched or curved walls, and is very friendly to uneven ground. Make the connection between the wall and the ground more smooth. |
Easy to cleanThis baseboard trim is waterproof and oil resistant. When something dirty appears, just wipe it with a clean damp towel. |
|
|
|
---|---|---|
Free CuttingThis Wall Base Molding trim can be cut to any length and shape you need.The installation is also very simple.NO SCREWS or DRILLING. Installation can be done without additional tools. |
Toe DesignThis vinly baseboard molding trim has a toe design, which can effectively cover various defects and uneven ground, and can also prevent dust from entering the gap. Make your room look clean and tidy. |
|
Q1:Can this item be painted?
A1:The product itself has been tinted to suit most wall colors. If you are not satisfied with the color of the product itself, you can try painting it with oil-based paint or latex paint.
Q2: Some parts of the product are a bit arched and cannot be pulled into a straight line, what should I do?
A2:Because the wall base is a rolled-up pack, it bends a bit naturally. Roll it in the opposite direction to offset its tension so that it can stick properly.Before installation, please tile the trim for a period of time to ensure the best installation effect. If necessary, use a heat gun or hair dryer to heat the curved part to soften it.
Q3: Is it flexible enough to handle corners or does it need to be cut?
A3:No cutting is required, the wall base fits the wall very well. When encountering outside corners, we recommend that you use a heat gun or hair dryer to soften the wall base, bend it, and then paste it directly. If you want the best results, we recommend thinning the backside of the wall base a bit where it meets the corner. When encountering inside corners, you also need to use a heat gun or hair dryer to soften the wall base, bend it to form a right angle, and make the trim fully fit the wall, finally cut the lower lip to form a 45° angle.
Q4:What are the unsuitable materials for?
A4:Powdered wall、Rough cement wall、Uneven wall、Damp wall、Wall covering、Wall Sticker.In the above situation, the viscosity of the glue will decrease slightly. It is recommended to add some glue during the installation process and complete the installation with the help of a hot air blower to achieve the best performance.