Feature(may vary by option.)

●【Humanized Design】: Vacuum and strong suction are generated by the suction handle to quickly discharge the liquid inside the device. Special ultra-wide base design, easy to stabilize the tank. The nozzle is flat to avoid overflow of waste liquid. Track progress easily with built-in tagging. The design of the sealed cover and the thickened inner wall make the storage tank well sealed, anti-fall and have a longer service life.
●【Widely used】: Not only suitable for draining old fluids from cars, tractors, lawn mowers, marine engines, stationary engines and industrial machinery, but also suitable for low viscosity fluids such as stagnant water or coolants.
●【Matters need attention】: It is forbidden to use gasoline, highly volatile, highly corrosive, highly alkaline, and high-temperature liquids on the extractor.
●【Portable & Simple】: Portable sturdy and lightweight pump for changing liquids. The manual operation is simple, no other auxiliary equipment is needed, and the oil change can be completed independently, saving time and effort. Simply wash with soap and water after use.
●【Package Contents】: The material includes a fuel tank, two caps, a plug, a separator, a pour spout, a handle and four hoses of different sizes (4mm, 6mm, 8mm, 10mm).

[9L]




[6L]





Description

11
11

This product does not need air pump, only need a single manual operation, you can quickly and easily pump a variety of oil.

It only takes 10 to 20 consecutive aspirations to create a powerful vacuum. The strong transparent container (6L/9L) allows for clever oil collection.

A scale on the wall of the transparent container lets the user know how much oil has been removed.

Includes a dumping port to aid in emptying.

Pump is removable for easy storage.

Suitable for ship/automobile/motorcycle/outdoor power equipment/industrial machinery and other oil change. It can also easily remove bilge water on the ship, stagnant water in the plumbing system, etc.

Includes:

  • Outer diameter 10mm, inner diameter 8mm hose x1
  • Outer diameter 8mm, inner diameter 6mm hose x1
  • Outer diameter 6mm, inner diameter 4mm hose x1
  • Outer diameter 5mm, inner diameter 2.5mmx1

11

11

11

11

1.Screw the handle and hoses

onto the pump.

2.Remove the oil dipstick and

mark the length of dipstick with

marking ball.

Insert the suction probe to

reaches the bottom of the oil pan.

3.Pump the handle several times until enough vacuum is created and you will see the fluid begins to fill the tank.

Please keep pumping during extraction to maintain the vacuum to suck out every drop of oil. Intuitive operation without instruction manual, easy to use.

4.After pumping, change the hose to pour spout and pour the oil out from the container.

Cover with sealing cap to storage when finish the job.

Product information