Feature

●[Complete Accessories] The product size is 58*22*22cm. It has a 6.5L tank, a Brake Bleeding Hose, three 3.28ft extension pipes and a Wire Dipstick. Complete accessories can bring you a better experience.
●[Multiple Uses] Pneumatic and manual two ways, suitable for different user needs. The pneumatic mode gives you higher speeds, while the convenient manual mode requires no other equipment.
●[Quick Extraction] The fastest extraction speed of the product was 1.8L /min. The oil changing pump can quickly extract the oil from the car under the pneumatic mode. The use of dipstick can thoroughly absorb every drop of oil.
●[Easy to Use] With the oil extractor, you no longer have to go under the car to do fluid changes, nor do you work after the messy ground cleaning process. Simply turn on the device, insert the tube and change the oil.
●[Freedom of Work] Because its easy to use and doesnt matter where you are, you can change oil anytime and anywhere. Perfect for working on cars in the garage, but also for using outdoors on boats, trucks, or lawn mowers, or even extracting water from fish tanks, etc.

Description

6.5 Liter Pneumatic/Manual Oil Changer Vacuum Fluid Extractor

Accessories Details

Installation Process


Step 1. Preparation Operating temperature is between -22° F and 168° F. Cool the engine for at least 15 minutes after driving. If the car has been placed in a cold area for a period of time, the engine should be warmed up for at least 3 minutes before oil pressing.	Step 2. Open The Lid Open the engine cover, remove the cylinder cover and select the appropriate tube to insert. If the hose is not long enough, connect an extension pipe to the main pipe until it reaches the bottom of the oil pan.	Step 3. Insert Pipe To Extract Oil Pneumatic and manual two ways, suitable for different user needs. The pneumatic mode gives you faster speed when connected to the air compressor, while the convenient manual mode requires no other equipment.	Step 4. Pour Out The Oil Press the pressure relief valve to release the negative pressure. After removing the hose, pour the used liquid into another container and take it to a nearby processing center for recycling. Cover the cylinder head to complete the oil extracting work.

Features


Blot Up Every Drop Of Oil By connecting to the extension pipe, the extension head reaches the bottom of the reservoir container and sucks up every drop of oil.	Equipped With Wire Dipstick Insert the line measuring ruler into the hose, and the hose can be held up with force. It can also be inserted into the liquid to measure the oil level.	1/4” Air Inlet And Hand Handle Pneumatic mode connected to the air compressor can give you faster speed, labor saving, higher efficiency. Manual mode without external devices, more convenient.

Freedom of Work

Because its easy to use and doesnt matter where you are, you can change oil anytime and anywhere. Perfect for working on cars in the garage, but also for using outdoors on boats, trucks, or lawn mowers, or even extracting water from fish tanks, etc.

Specification

Capacity	6.5 Liter / 1.7 Gal
Scope of Application	Fluidity liquids
Gross Weight	3kg / 6.6lb

Working temp	(-30°C~60°C) / (-22°F~168°F)
Product Size	582222 cm
Top Speed	1.8L / min

Accessories Details

Installation Process

Step 1. Preparation

Step 2. Open The Lid

Step 3. Insert Pipe To Extract Oil

Step 4. Pour Out The Oil

Features

Blot Up Every Drop Of Oil

Equipped With Wire Dipstick

1/4” Air Inlet And Hand Handle

Freedom of Work

Specification

Product information