This dual-action pneumatic transmission fluid pump is used to extract, deliver and dispense transmission fluid quickly, cleanly, safely, and non-sparking. It is simple to operate and eliminates the need for tedious and laborious manual work with an air compressor. Equipped with a wide range of adapters, it will be the ideal tool for your oil changes.
Application:
It is applicable to various models. It is applicable to all kinds of low concentration non-corrosive automotive liquids, such as differential oil, gear oil, power steering fluid, engine oil, transmission oil, lubricating oil, brake fluid, coolant, etc.
Key Features:
- Robust and Durable:
Featuring a plastic oil barrel, copper connector, PU oil pipe, and stainless steel adapter.
- Double Action:
The consistent changeover between the blue screw valve and the air inlet ball valve allows for the double operation of oil extracting and dispensing to increase your efficiency.
- Safety Protection:
The safety valve allows automatic pressure relief after the pressure reaches 8 bar. Meanwhile, the pressure meter allows you to easily understand and control the pressure in the barrel.
- Oil Outlet/Suction Pipe:
The oil outlet pipe and oil suction pipe can be directly inserted into the oil tank or dipstick tube of the vehicle to extract or refill transmission oil without jacking up the vehicle or crawling under it for work.
- Thoughtful Design:
The buckle on the handle can lock the trigger for a long time to reduce work fatigue. The quick-plug connector allows you to connect quickly with just one simple snap.
- Adjustable Flow:
The flow control valve can freely adjust the oil extraction speed according to your needs.
- Multiple Adapters:
Equipped with 13 adapters, it can be applied to transmission tank of most vehicle models.
- Oil Barrel:
The 10L translucent oil tank allows for more gearbox oil to be filled at once.
- Carrying Case:
The heavy-duty carrying case with precisely sized compartments for each adapter is ideal for protective storage and transport.
ATF101 (1/8"-27)
ATF102
ATF103
ATF104
ATF105 (M10 x 1)
ATF106 (M24 x 1.5)
ATF107 (M22 x 1.5)
ATF108 (M18 x 1.5)
ATF109 (M12 x 1.5)
ATF110 (M30 x 1.5)
ATF111 (Universal Flexible 300mm)
ATF112 (M8 x 1)
ATF113 (M18 x 1.5)
Notes:
1. This product is suitable for use from 8 bar to 12 bar, high pressure is prohibited. It is not suitable for highly corrosive, highly concentrated, and high-temperature petrol and liquids.
2. Please ensure that all parts are tightly connected, and we recommend that always wear a protective mask and goggles(not included) when operating.
3. Close the screw valve clockwise when refueling, while the valve is at low pressure; open the screw valve counterclockwise when pumping, while the valve is at high pressure. The blue spiral valve must be in line with the air control on/off valve.
4. If you find that the oil suction or discharge is slow after several uses, check the blue screw valve. The flow rate can be restored by grinding the threads of the cap shorter.
5. After receiving the gearbox oiler, the cover must not be unscrewed, because the pressure is set at the factory. If it is unscrewed, it will pump slowly and add slowly. You need to return to the factory for debugging. In case of insufficient suction, check the sealing condition of each component.
6. Please read the manual completely before installation and use, and pay particular attention to the safety instructions included.
7. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.
|
|
|
|
---|---|---|---|
|
|
|
|