Feature
●【Used for】Large 9 liter (2.4 gallons) capacity manual fluid evacuator used to extract and dispense a wide range of fluid types
●【Specification】 Main Material: ABS with Aluminium inflator; Suction Probes Diameter: Ø4, Ø6, Ø8, Ø10, and 1pc of Ø4 brass probe) probe length 1M; Fluid temperature range: 35°F- 200°F/1°- 95°C
●【Size】Four Fluid Extractor Hoses: Hose diameter: 4mm / 6mm / 8mm / 10m (0.157"/0.236"/0.315"/0.393")
●【Widely Application】The fluid evacuator is widely used to extract the engine oil, brake fluid, ATF fluid, and other non-corrosive and non-thick fluid of motorcycles cars, marine engines, stationary engines, and industrial machinery
●【Lightweight and Portable】This set is lightweight and portable and includes a 2.4-gallon reservoir. The reservoir is constructed of durable polyethylene and will not rust or corrode.
Description
Comes with four suction hoses to change different sizes for various condition;
9 Liter Fluid Evacuator Manual Oil Changer Vacuum Hand Operated Engine Oil Change Fluid Extractor Pump Tank
9 liters/2.4 Gal capacity fluid extractor, suitable for cars, boats, motorcycles, lawnmowers, etc
Fit for most fluid extraction applications; Perfect for working on cars in the garage or automobile repair shops Can also be used for draining fish tanks, basins, and sinks; Simply pump operation for easily remove the liquid; Probes can be stored in the holder when not in use.
How To Use:
1. Warm up the oil by running the engine - This will allow the contaminates to mix and to suspend in the oil. Remove the dipstick. (Note: If you cant hold the dipstick comfortably in your hands, then the oil is too hot! Wait for the oil to cool off a bit) ;
2. Select and insert the appropriate diameter extraction tube into the dipstick pipe until it touches the bottom of the oil pan. Connect the main tube to the top of the unit and to the extraction tube;
3. Pump the handle 4 to 10 times in a row to start the vacuum. The unit will extract the oil automatically. Continuous pumping is not required;
4. After all the oil has been extracted, press the release valve located at the top of the unit for 5 seconds. Remove the main tube. When pouring the oil into a container, hold the pump and pour gently. Do not hold it upside down! Bring the used oil to a recycling depot.
|
|
|
|
|---|---|---|
Specification:Capacity: 9 liters / 2.4 Gal; Suction Port: 32mm; Suction Probes: Ø4, Ø6, Ø8, Ø10, and 1pc of Ø4 brass probe), probe length 1M; Main Material: ABS with Aluminium inflator; Fluid temperature range: 35°F- 200°F/1°- 95°C. |
Easy to UseExtend the main tube by connecting with extension tube to reach the bottom of the reservoir, suck up every drop of oil. |
Package includes:1x 9L Oil Extractor; 4x Nylon Hoses; 1x Manual Instruction. |
