Feature(may vary by option.)

●1. Before replacing the lubricating oil, it is necessary to unplug the oil outlet plug.
●2. Use a manual oil gun to slowly add
●3. Avoid using the compressed air provided by the factory as the power source of the oil gun. If it is absolutely necessary, the pressure must be controlled within 5KGf/cm2, and the flow rate must be controlled within 15/ss.
●4. The specified lubricating oil must be used, other lubricating oil will damage the reducer
●5. After the replacement is completed, confirm that there is no lubricating oil flowing out of the outlet, and install the oil outlet plug.
●6. In order to prevent slipping accidents, completely remove the oil stains on the robot floor.


Description

Merian MOLYWHITE RE NO.00 special grease for robot is a special grease for robots S-axis, L-axis, U-axis reducer. MOLYWHITE RE NO.00 robot grease is widely used in Yaskawa robots, FANUC robots and Sumitomo robots. Many domestic robots use MOLYWHITE RE NO.00 special grease for robots with better results, which can ensure the integrity of the equipment. Japans original MOLYWHITE RE NO.00 automobile manufacturing is also a special lubricating grease for machinery. MOLYWHITE RE NO.00 lubricating oil (RE00 lubricating grease for Yaskawa robot arm)The robot needs to replace the J1, J2, J3, J4, J5, J6 axis reducer lubricating oil and the J4 axis gear box lubricating oil every three years or 10,000 hours of work. Some types of robots such as S430, R2000, etc. need to replace the lubricating oil of the balance block bearing every six months or 1920 hours of work.