1. APPLICABLE MODEL: 3044196 generator speed controller, suitable for EFC3408324 DYNA2000 DYNA2500 generator models, with good compatibility.
2. CLOSE CONTROL: Fully electronic closed control design, to control engine speed with fast and accurate response to instantaneous load changes.
3. PARAMETER REGULATION: Separate circuit allows adjustment of proportional, integral, and differential value, acting together to provide control, with accurate adjustment.
4. PRE ADJUST DESIGN: The controller is pre adjusted, including speed regulation and working speed, with high power, can directly drive engines above 500KK.
5. GOOD PROTECTION: The governor board provides safe protection against reverse battery voltage, transient pulse voltage, and actuator short circuit faults.
Specification:
Item Type: Generator Speed Controller
Material: ABS
Input Power Supply:
Power Supply Voltage: 12V 24V
Ground Polarity: Negative Electrode
Power Consumption: 40mA
Actuator Continuous Current: Minimum 1A, Maximum 4.5A (maximum current can 8A)
Speed Sensor Signal: 2-120V RMS
Technical Specifications:
Rotational Speed Stability: Better than ±0.25%
Speed Range: 1KHz-6.5KHz
Thermal Stability: Maximum ±0.7%
IDLE Regulation: 260±20Hz-85% of rated speed
DROOP Regulation: The minimum position is 15Hz ± 6Hz per ampere load current change, and the maximum position is 400Hz ± 75Hz per ampere load current change
External Speed Adjustment: ± 200Hz (external 1KΩ)
Input Sensitivity: 148Hz/1V, ±10Hz, Impedance: 1MΩ
Environmental Science:
Operating Temperature Range: -40℃-85℃
Operating Humidity Range: Maximum 95%
Storage Temperature: -55℃-92℃
Vibration: 20-100HZ, 500mm Per Sec
PackageList:
1 x Generator Speed Controller