Feature(may vary by option.)

●Resists mechanical pullout for a more secure connection
●Short flare nut for connecting to a tube or fitting
●Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
●Operating temperatures range from -65°F to +250°F(-53°C to +121°C)
●These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.

[1 & 4 Flare O.D]

[3 & 8 Flare O.D]

Description

Typical Application:LP and natural gas, fammable liquids (special order), insumentation referatinpower steering, hydraulic and pneumatic systems.
Pressure:W orking pressure up to 2000 psi depending on TUBE size. depending on size.Will withstand burst pressure of standard tubing- up to 5000 psi
with bundy-weld (double flared) and 3500 psi with copper tubing, Vibration:Good resostamce-use long nut when greater vibrantion resistance is required
Temperature Range:-65°F to +250°F(-53°C to +121°C) range at maximum operatomg pressures.
Material:CA 360 Brass for Barstock fitting.CA377 Brass for forged fittings.
Used With:Capper,brass,aluminum and steel hydraulic tubing that can be flared.
Advantages：Low cost and reusability,long or shout nut.Good resistance to vibration