1. SINGLE OUTPUT: The manual lubricating oil pump has a single output of 4mm, a discharge capacity of 8cc, and a volume of 500cc.
2. HIGH PRESSURE: This is a plunger structure manual pump with high pressure, has a maximum discharge pressure of 15Kgf/c㎡.
3. EASY TO OPERATE: Simply pull the handle by hand, then push the plunger and drain the oil from the cylinder, then release, the plunger absorbs oil under the force of the spring.
4. LUBRICATION SYSTEM PART: The hand lubrication oil pump can be combined with a throttling distributor to form a lubrication system. It is recommended to use oil viscosity N20 to N1000.
5. WIDE APPLICATION: This hand oiler lubricator can be widely used in machine tools, milling machines, lathe machining centers, production lines and machine tools.
Spec:
Item Type: Manual Lubricator Pump
Material: Cast Aluminium
Model: Y8
Pump Drive Mode: Manual
Transmission Medium: Oil
Pump Type: Pressure Pump
Outlet Capacity: 8cc
Maximum Outlet Pressure: 15Kgf/c㎡
Volume: 500cc
Outlet Diameter: Approx. 4mm/0.16in
Outlet Thread: M8X1 (Dia4)
Application: This pump can form a lubrication system with a throttling distributor. It is recommended to use an oil viscosity of N20-N1000
How to Use:
Directly install and use.
PackageList:
1 x Manual Lubricator Pump