Feature

●●[Hydraulic Pump Body] Non-slip handle hydraulic pump body, release valve and hose. It has a smooth surface, good sealing and no oil leakage.
●●[manual relief valve] Pull back and forth to adjust the oil inlet and oil return mode. The middle gear is the pressure relief position, and the other two gears are the pressurized position.
●●[Oil Pipe and Quick Coupling] CP-700 hydraulic pump is designed with two 1.8m hose for oil storage and two quick disconnect coupling of ZG 3/8 thread.Double hydraulic tubing adopts two hydraulic oil pipes, one in and one out.
●●[Ventilation Nut] There is a switch indicator at the end of the pump body, this nut must be loosened during use to avoid the oil tank sealing.
●●[Wide Application] The pump can be used with hydraulic tools, such as hydraulic cylinder jacks, hydraulic crimpers, hydraulic punchers, hydraulic pipe benders, hydraulic flanges, etc., which can save effort and improve work efficiency.


Description

Description

·It is a separate manual hydraulic pump.

· Should be used with hydraulic puncher, hydraulic cutter, hydraulic cylinder, hydraulic pliers, etc. ·Hydraulic hose included.

Technical Data

Model: CP-700

High pressure pressure: 700kg / ㎝²

Low pressure pressure: 20kg / ㎝²

Oil storage capacity: 3000cc

High pressure flow: 2.3cc

Low pressure flow: 13cc

★Advantages---This pump is durable, smooth surface, good sealing performance.

★Pressure relief valve--- When working, tighten the oil return valve clockwise; when releasing pressure, loosen the oil return valve counterclockwise.

★Double hydraulic tubing--- It adopts two hydraulic oil pipes, one in and one out.

★Ventilation nut--- switch on the tail of it, you must unscrew the nut when using, to avoid sealed of oil box.