Feature

●Plastic, alloy
●This dual cylinder car mounted inflations pump is applicable to 12V car tires, motorcycles, bicycles, balls, rubber boats, beach floating beds, inflatable toys, etc. It is convenient to carry and powerful in performance.
●Professional and stable on-board inflations pump, 30s fast inflations, refused to wait, stopped when filling, easy to operate, girls can also easily use.
●This inflations pump uses a high-density sensing chip, which can accurately sense the tire pressure, give you the tire pressure value in time and accurately, and ensure travel safe.
●The charging pump is designed with a metal cylinder and equipped with a permanent magnet motor, which can fully ensure the quality and performance during use.
●The button type interface design can be pressed at one time, no need to tighten the screws, no damage to your car, and the pure copper coil motor is not hot and has low noise.


Description

150PSI Tire Inflator Portable A-ir Compressor A-ir Pump For Car Tires 12V Auto Tire Pump With Digital Pressure Gauge With Emergency LED Light

Product parameters:

Product type: Vehicle mounted inflations pump

Material: Plastic, alloy

Product color:Yellow

Product size: 13.2x5.3x20.3cm/5.2x2.1x8.0in

Packing size:21x15.5x6.5cm/8.3x6.1x2.6in

Gross weight: 480g/1.1lb

Rated voltage: DC12 (V)

Power line length: 3 metres

Length of gas pipe: About 0.37m

Air volume: 45L/min

Piston diameter: 19mm

Maximum Air pressure: pressure: 0-150psi

Precautions:

It is not allowed to inflate the tires of large and overweight vehicles, such as trucks, trucks, container trucks, etc.

When inflating, please stop the machine for 10 minutes for cool-ing later 10 minutes of continuous operation to guard against damage to the A-ir pump and accessories, and prolong the life of the motor. When the rubber-boats is inflated, it can work continuously for 30 minutes.

Generally, the normal tire pressure of 30PSI can be reached in 3-5 minutes when the tire is inflated, and it will take a little longer for large tires. If the pointer of the instrument rises rapidly to 50-100PSI at the beginning of inflations, it means that the air is blocked and the air does not enter the tire. At this time, it is necessary to immediately pull off the air nozzle connector and re operate, otherwise the motor and instrument are easy to be damaged.

People shall not leave the body when using, and shall follow with interest the tire pressure at any time, and shall not be too saturated.

The a-ir pump plug is equipped with a FUS-E. If the a-ir pump does not start, please open the plug to check and replace it. (the FUS-E is 10A)

The pressure required for each type of tire is different.