Feature

●This air compressor pump head is made of high quality aluminum material, which is not easily damaged.
●This air compressor pump head has two inlet and outlet filters, very high efficiency, high precision, and low energy consumption.
●The V-cylinder design and powerful cooling vanes provide excellent cooling performance, reduce humidity and extend the life of the air compressor pump.
●The air compressor pump head is made of special valve steel, which has good strength and toughness under high temperature to ensure the smooth operation of the main engine.
●Pump speed is 800Rpm, fast filling speed and low noise.


Description

Specifications:

Rated Pressure: 175 Psi (1.16Mpa)

Driving Power: 4Kw (5.5Hp)

Pump Speed: 800Rpm

Cylinder Diameter: 3.54" (90mm)

Distance Of Screw Hole: 26cm*14cm (10.2"*5.5")

Rated Exhaust Volume: 0.6L/Min

Item Included:

1* Air Compressor Pump Head

Installation Notes:

1、When placing the pump head, the motor pulley and the belt pulley must be in the same straight line. the more aligned, the less vibration.

2、Tighten the screws (including the base and pulley screws).

3、After the screws are installed, the belt shall be tightened. if the belt is loose, please move the motor. after the screws are tightened, reinstall the belt.

4、The new machine must be filled with engine oil before starting, and the engine oil shall be added to the center of the red point of the oil mirror.

5、The rotation direction of the pump head is clockwise. if it reverses, please adjust it in time.

6、Change the oil for the first half month, the second one and a half months, and the next two to three months.

7、Replace the air filter regularly. under normal conditions, it must be replaced in two to three months, and in case of poor environment, it must be replaced in one month.

8、The operation of the machine will produce high temperature, be careful not to burn!