Feature

●Accurate chucks can firmly hold the bit more securely for stable and excellent performance. Premium carbon steel handle suitable for different drill bits, anti?slip and can provide more stability.
●M19 x 2mm thread makes it suitable for different electric drills with widely applicable uses. Accurate chucks can firmly hold the bit more securely, stable and excellent performance.
●Suitable for most tools, such as electric drills. M19 x 2mm thread makes it suitable for different electric drills, widely applications.
●The maximum load speed of the flexible shaft is 8000?12000rpm, providing high efficiency.
●Premium carbon steel handle suitable for different drill bits, anti slip and can provide more stability. Used for most tools, such as for 3000 4000 electric drill and so on.


Description

Specifictaion:
Condition: 100% Brand New
Item Type: Flexible Shaft
Material: Carbon steel + rubber hose
Length: Approx. 1.1m / 3.6ft
Thread: M19 x 2mm / 0.08in (suitable for all kinds of small electric drill)
Comes with 3.2mm chuck + hex wrench

Flexible Shaft Using Tips:
1. Because the flexible shaft steel wire core rotates at high speed in the flexible shaft sleeve, high speed friction will make the inner wall of the flexible shaft heat, the higher the speed, the flexible shaft wear is about severe, the more severe the heat will be, and even damage the flexible shaft shell.
Advice:
1). Do not use the flexible shaft drive for a long time to grind the work, and stop for a rest every 10-15 minutes.
2). Try to reduce the bending degree in the use of flexible shaft, and try to maintain linear transmission.
3). Do not overload operation, increase the friction heat generation of flexible shaft
4). After using for a period of time, drop some oil along the flexible shaft for lubrication and heat dissipation.
2. After the flexible shaft is connected with the body of the electric mill, please do not disassemble.

Packing List:
1 x Flexible Shaft
1 x Hex Wrench