Feature

●Peak: 800 watts/RMS: 400 watts
●Sensitivity: 84dB
●Frequency Response: 25Hz-500Hz
●Mounting Depth: 5 9/16"
●Mounting Cutout Diameter: 9 1/4"
●Dual 2 Ohm
●Aluminum Alloy Lightweight Cone
●Butyl Rubber Surround
●Tinsel Leads Woven into Spider
●2" Copper Voice Coil
●Steel Basket
●Ferrite Magnet
●Aluminum Former Material


Description

HA-A102 10" Alloy Series Car Subwoofer

• Peak: 800 watts/RMS: 400 watts
• Sensitivity: 84dB
• Frequency Response: 25Hz-500Hz
• Mounting Depth: 5 9/16"
• Mounting Cutout Diameter: 9 1/4"
• Dual 2 Ohm
• Aluminum Alloy Lightweight Cone
• Butyl Rubber Surround
• Tinsel Leads Woven into Spider
• 2" Copper Voice Coil
• Steel Basket
• Ferrite Magnet
• Aluminum Former Material

Dual 10" 88-98 Chevy Extended Cab Sub Box Sealed Enclosure

• Air Space: 0.95 Cubic Feet
• Mounting Depth: 6"
• Dimensions: Width 56-3/4" x Front Height 10" x Rear Height 6-1/4" x Depth 13-1/4"
• High Quality MDF and Black Carpet
• High Quality Binding Terminal Cup (Accepts Banana Terminal Plugs OR Bare Wire up to 10GA)
• Enclosure installs under rear seat down firing

Kicker 46CXA8001 Car Audio Class D Amp Mono 1600W Peak Sub Amplifier CXA800.1

• Three-second turn-on/off delay to eliminate unwanted interference
• Variable 12dB crossovers provides control to dial in perfect sound
• KickEQ 6dB variable bass boost for those additional low frequencies
• 24dB subsonic filter for protection from potentially damaging frequencies
• FIT+ (Fail-safe Integration Technology-PLUS)
• Accepts up to 40-volt input signal
• 600 Watts x 1 @ 2 Ohm RMS/1200 Watts x 1 @ 2 Ohm PEAK
• 800 Watts x 1 @ 1 Ohm RMS/1600 Watts x 1 @ 1 Ohm PEAK
• Frequency Response: 25Hz - 200Hz
• Signal to Noise Ratio: 95dB
• High level 250mV-10V
• Low level 125mV-5V
• Active Crossover: 12dB/octave, variable 50-200Hz, low pass only
• Subsonic Filter: 24dB/octave high-pass fixed @ 25Hz
• Kicker EQ Boost: Variable to +12dB, centered @ 40Hz
• 8-1/8" x 7-3/16" x 2-3/8"

Harmony Audio HA-AK4 Amplifier Install Kit Included