Feature

●High quality 3/4inch Brass Electric Solenoid Valve: Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc.  
●Normally closed electric solenoid valve: 2 way solenoid valve,Model: 2W-200-20;Voltage:AC110 volt;   3/4" NPT port,   Working temperature range: -5 ℃~80 ℃; Operating  Pressure: MIN.0kg/cm - MAX.10kg/com  
●This solenoid valve 110v was manufactured with a VITON seal,two-way inlet and outlet ports with standard female thread NPT connectionsm and heat and oil resistant Viton gasket.   
●Applicable Irrigation Controls (garden, Farm,etc.), Liquid Controls ( Pipeline, Artificial River Etc. and Air Controls ( Lab, Factory, Etc.) -3/4 inch Brass Electric Solenoid Valve Also known as110v solenoid valve,electric solenoid water valve,brass liquid solenoid valve. 
●This valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, We will gladly replace it.  

[0.75 Inch]





Description

3/4" Brass Electric Solenoid Valve, 110V Air Valve Normally Colsed for Water Air Gas Fuel Oil 2W-200-20

Made of Solid Brass

Thick smooth inner wall without burr, long service life

High quality copper coil

- The resistance is lower than that of aluminum wire

- Strong electrical and thermal conductivity

- Good stability, corrosion resistance and oxidation resistance

Thread clear

The interface thread is clear and not easy to slip, the connection is precise and not easy to leak

Model: 2W-200-20

Size: 3/4"

Flow Aperture: 20 mm

Body Material: Brass

Gasket / Diaphragm / Seal: VITON

Rated voltage: AC 110 V, ± 10%

Current: 0.191 A

Power rating: 21 VA

Operation Type: Semi-direct Lift Valve

Operation Mode: Normally Closed

Working Pressure: 0-145psi

Working Temperature: -5 ℃~80 ℃

Suitable Media: Air, water, oil, natural gas, diesel fuel, kerosene etc.

Valve is not intended to be energized continuously for more than 8 hours. This can lead to burnout of the coil, and malfunctioning of the valve.