Feature

●WORKING PROCESS:The photoelectric switch converts the input current into a light signal on the transmitter, and the receiver detects the target object according to the intensity or presence of the received light.
●WORKING PRINCIPLE:Photoelectric switch makes use of the block or reflection of the detected object to the light beam, and the circuit is turned on by the synchronous circuit to detect the presence or absence of the object.
●WIDE RANGE OF USES:The detection objects of this photoelectric sensor switch are not limited to metal, and all objects that reflect light (or block light) can be detected.
●HIGH SENSITIVITY:The sensor uses infrared light to detect the objects for sensitive detection with delay that can be almost ignored.
●SAFETY DESIGN:The photoelectric switch converts has built-in multiple protection circuits to ensure safe use.


Description

Specification:
Model: CDD-11N
Power Supply Voltage: DC12-24V
Output Form & Status: NPN NO
Detection Distance: 10mm
Detecting Objects: Opaque objects
Cylindrical Head Diameter: 18mm
Line Length: 1.75m
Light Source Type: Transmitting tube
Induction Method: Diffuse reflection
Protection Level: IP66
Housing Material: Copper plating
Control Output: <300mA
Current Consumption: <10mA
Response Frequency: 500Hz
Voltage: <1.5V
Indicator Light: Action indicator (red LED)
Insulation Resistance: >50MΩ (500VDC megohm reference)
Withstand Voltage: 1500VAC 50/60Hz 1min
Vibration Resistance: 10-55Hz (cycle one minute) amplitude 1mm X, Y, Z 2 hours in each direction
Impact Resistance: 500m/s² (50G) X, Y, Z 3 times in all directions
Operating Environment: -25~+70°C, 35-95%RH
Storage Environment: -30~+80°C, 35-95%RH
Protection Circuit: Built-in Surge Protection Circuit, Power Reverse Polarity Protection Circuit, Over Current Protection Circuit

Package List:
1 x Photoelectric Sensor Switch