Bending Pipes Using the heat gun you can bend a piece of PVC pipe at just about any angle without using any adhesives or elbow joints. Not only convenient but also dramatically speeds up the job.
|
Removing Rusted Bolts Heat the nut with a heat gun if it wont come off. This causes the steel to expand, which can break the rust seal. Apply heat for about a minute, then allow the nut to cool.
|
Shrink Packaging Film You can use this heat gun to shrink the film easily. Start from a distance and gradually move closer to the contracting film until the desired effect is achieved.
|
Floor Tile Replacement You can use the heat gun to remove glued floor tiles, just apply heat to the tiles to soften the glue underneath. Then pry the tile to produce a gap. Be sure to move the heat gun back and forth to prevent localized overheating.
|