[Blue]
[Black]
This is a modal window.
Magician X2 has preset the firmware which hot end can reach 300°C. If user needs to print specific filament, please come to our official website and look for the firmware first, and purchase the all-metal hot end in it.
The LED light equipped above the hot end will be divided into multiple stages according to the temperature change. Users can judge the temperature according to the color of the light to avoid burns.
Printing Size | 230*230*260 mm³/ (9″x9″x10.2″) |
Max Nozzle temperature | 260 °C (300°C) | 500 °F (572°C) |
Max Bed temperature | 110 °C | 230 °F |
Machine Dimension | 46*41.5*54.6cm³ / 18.1x16.3x21.4in(X×Y×Z) |
Package Weight | 23.02 lb|10.44kg |
Machine Weight | 15.76 lb|7.15kg |
Voltage | Input 115v/230v50/6Hz Output 24v |
Thermal Runaway Protection | Yes |
Resume printing | Resume printing after power outage/filament run out |
Control panel | 3.5 inch colorful LCD touch screen |
Filament Run-out Detection | Supported |
Support File Format | Gcode |
Nozzle Diameter | Standard 0.4mm (Compatible with Size 0.6mm, 0.8mm, 1.0mm) |
Operation System | Windows/ Mac/Linux |
9″x9″x10.2″ | Printing Size | 9″x9″x10.2″ |
Photoelectric switch | Limit switch | Mechanical switch |
| Smart Auto leveling | |
| Z-offset adjust | |
| Glass Printing Bed | |
| Removable Extruder | |
| Part Cooling of Base |
9″x9″x10.2″ | Printing Size | 12.6″x12.6″x15.75″ |
Photoelectric switch | Limit switch | Mechanical switch |
| Smart Auto leveling | |
| Z-offset adjust | |
| Glass Printing Bed | |
| Removable Extruder | |
| Part Cooling of Base |
9″x9″x10.2″ | Printing Size | 15.75″x15.75″x15.75″ |
Photoelectric switch | Limit switch | Mechanical switch |
| Smart Auto leveling | |
| Z-offset adjust | |
| Glass Printing Bed | |
| Removable Extruder | |
| Part Cooling of Base |
How to purchase Magician X2 accessories?
All the part you can purchase on Mingda official website: 3dmingdaofficial.com
How can I resolve the corresponding popup, such as "Min Temp Bed E1" "Max Temp E1" etc?
You can download the file "FAQ.pdf" below the “Product guides and documents” and find the corresponding solution, if the popup you meet isnt in the FAQ , send message for our Amazon service.
What should I notice when I unbox the package and assemble the printer at the first time?
Some components on the printer are fragile, if you are the first time to use our printer. We recommend you to watch our guide video below the product title.
What can I do when I receive the package with missing part or defective part?
Refer to the manual guide, and check if there are missing accessories, or take a pic of the defective part after unboxing. Send us your request via Amazon message or our support mail-box, We will send you part immediately.
How can I create my Magician X2 slice profile?
We uploaded it on Cura 5.2, you can use the profile named "Magician X" directly. If you prefer to use the PrusaSlicer or Simplify3D, you can ask for it from our tech-support team via Amazon message.