![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|
---|---|---|---|---|---|---|
26PCS Sanding Belts | Belt Sander | Belt Sander | Belt Sander | Orbital Sander | Jig Saw | |
Main Feature | Belt Sander Accessories | Higher Efficient Flat Grinding, Bench Sander | Highest Efficient Flat Grinding | Efficient Flat Grinding, Bench Sander | Premium Flat Grinding | Metal/Plastic/Wood Cutting |
Include | 26Pcs Sanding Belts | 10Pcs Sanding Belts, 2Pcs Clamps | 12Pcs Sanding Belts, Carbon Brush, Belt | 12Pcs Sanding Belts, 2Pcs Clamps | 18Pcs Sanding Discs | 10Pcs T-Shank Blades |
Sandpaper Size | 3*21inch | 3*21inch | 3*21inch | 3*18inch | 5inch/125mm | T-Shank |
Power | - | 7A | 8A | 5.5A | 3.8A | 6.7A |
Variable Speed | - | 152-320RPM | 170-380RPM | 280RPM | 6000-13000RPM | 800-3000SPM |
Life of Carbon Brush | - | 50H | 2*50H | 50H | 100H | 50H |
Dust Collector | - | Dust Bag | Dust Bag | Dust Bag | Dust Bag | - |
Cord Length | - | 10ft | 10ft | 10ft | 10ft | 10ft |
Weight | - | 7lb | 7.7lb | 6.5lb | 4.6lb | 5.3lb |
Connect the Vacuum Cleaner | - | ?? | ?? | ?? | ?? | ?? |
Special Features:
Note:
|
|
|
---|---|---|
How to Install the Sanding BeltWhen installing the sanding belt, please keep the arrow on the belt in the same direction of the arrow on the machine, which enables the belt a longer service life, avoiding leaving scratches on the board. |
7 Amp Belt Sander with 2 in 1 Vacuum AdapterJellas 7Amp 3"x21" belt sander is on the powerful side, able to strip down a piece of wood in a short amount of time. Smoothing and shaping wood best on large, flat surfaces. The belt sander includes a 2 in 1( 32mm and 35mm) vacuum adapter to connect to a vacuum cleaner. |
Free Gift - 10Pcs Sanding Paper(60 or less) Grit - Very Coarse - Material removal, heavy paint removal, shaping wood. (80-100) Grit - Coarse - Paint removal, rough surface preparation (e.g. non-planed wood). (120-150) Grit - Medium - Surface preparation planed wood. (180-220) Grit - Fine - Sanding between coats. 240 or more - Very Fine - Final finishing. |
√Always ensure that the machine is switched off and plug is removed from the power point before making any adjustment.
√Run the sander for a minute or to ensure correct alignment before using the sander on a workpiece.
√For longer periods of use or on large pieces of work, it is advisable to use a suitable vacuum cleaner. (32mm and 35mm vacuum cleaner ports both fit Jellas Belt Sander)
Steps to attach a sanding belt:
Step 1, Select the required grade of sanding belt.
Step 2, Pull the belt tension lever
Step 3, When attaching a sander paper, please slip a sanding belt by the direction of arrow shows on the sander.
Step 4, Fold down the lever
Step 5, While the belt is running slowly, adjust the tracking adjustment knob to align the belt to the center of the roller.
Step 6, Repeat the trigger action and tracking adjustment until the belt is aligned correctly.
Step 7, Before using the sander on the workpiece, run the sander for about one minute to ensure correct alignment.
Do not continue to use the sander with a sanding belt that is overworn or damaged. Do not use the same sanding belt for wood and metal. Metal particles become embedded in the belt and will scour a wooden surface.