Feature
●1/2 Ton
●Drilled for use with our custom eyelet die sets
●We drill the hole in the Ram and the Anvil to hold the dies but we do not use the index pin in the anvil to line it all up. The anvil (part that holds the bottom die) will float and move around on the press base. The hole in the bottom anvil holding the eyelet die will not line up with the hole in the ram holding the top die. See the video for more on this.
●We drilled a 3/8"diameter mounting hole in the ram bar and also drilled and tapped a set screw to hold the die in place. We also drilled a mounting hole in the bottom anvil.
Description