Feature
●The blade of our LVT-330 cutters can be moved. There are many complex scenes on the construction site that need special cutting (irregular corners，most of which are columns, door edges and wall corners). It can help you finish your work smoothly. Be sure to buy one of the good things and try it, not to mention the beautiful price, which will save you a lot of time！ring),Laminate,Engineered floor or hard plank.Please refer to the seventh picture on the left.
●Design for cutting LVP, WPC, SPC, LVT, VCT, PVC, Vinyl Plank Flooring. Cutting unapproved materials will void warranty.No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor.
●Replacement blade can be got at the online official brand store (MANTISTOL).
●Why does the floor you cut crack? Because your floor must be Rigid Core Vinyl Plank （SPC or RVP）, it is a stone-plastic composite material, which contains stone powder; Floor cracks occur when at least two or more cuts are required to make long cuts and corner cuts.If you want to cut it,Each cut can only cut 1/16 inch, which is equal to that each cut is the upper surface of the floor. (requires some skills and control your strength)
●13" cutting width and 8mm cutting depth. Straight cut, Angle cut; " L & ?" cut, Rip cut and more. Clearly marked measuring guide. 0-45° Angle Cutting, Translational cutting,the deep of the throat is 115mm/4.5inch.Easy to use and to carry around.
[13 Vinyl plank cutter Black Silver]
[13 Vinyl floor cutter Eighth upgrade Black]
[9 Vinyl plank cutter Seventh upgrade Silver | black]
Description
Straight cut
Cuts 12.9” long and 5/16" (8mm） deep
Design for LVP, WPC, SPC, LVT, VCT, PVC, Vinyl Plank Flooring；
Max. Cutting Length: 328 mm / 12.9 inch
Max. Thickness Cutting: 8mm / 5/16 inch
Features: Straight cut, angle cut, notch cut and rip cut；
The blade can be moved from either side of the blade holder to make a notch cut.
Adjustable handle angle for easy operation, moving and store
Angle cut
45 Degree Cut
Lengthwise cuts, notch cut and rip cut
Soft vinyl flooring can be fully cut (Cutting length 13 inches or other sizes);
Hard and prone to cracking flooring, must be cutted shallowly (1/16 inch deep & approximately 4 inches cutting length); Move the floor again and continue cutting until the end.
How to cut spc flooring?
Notch cut and rip cut (Need thinking skills)
Locking pin for shrinking cutter
Adjustable handle angle for moving and store
Adjustable handle angle for easy operation, carring and store.