●Best way to repair an undermount sink --- A once-for-all effort for you because this product sets you free for good from having to frequently fix your falling sink. Enjoy your cooking without worrying about your sink. ●Easy to install --- No need to remove the sink to install this product. All you need is an electric wrench and screws to fix the base of the bracket, and tighten the hexagon threaded rods until the entire bracket is firmly thrust against the edge of the sink. The attached manual gives detailed step-by-step descriptions. ●Strong steel --- A perfect bracket for undermount single/double bowl sink. Even a double bowl sink fully loaded with water does not swing when supported with this bracket. Surface galvanization makes sure this bracket does not grow rust in the humid kitchen conditions and provides prolonged services to you. ●45° support range --- The support rod can rotate by 45°, which makes this bracket workable even if the sink is a bit far from the wall. The package includes four long support rods and a short one that can be installed in any possible position at your convenience. ●After-sales service --- We promise full refund if any craftsmanship defects are found. In the case of damaged missing parts, contact us and we will send you replacements. Note: Please download the installation instructions from the details page.
[Sink Brackets]
[Adjustable Sink Legs]
Description
Eapele Sink Support Brackets for Undermount Sink
Strong hold and easy to install.
Installation about Eapele Sink Repair Kit
Insert the bracket into the inner flange of the sink.
If you need to apply sealant to the opening between the sink and countertop, do it before you secure the bracket.
Installation about Eapele Sink Repair Kit
Place the base of bracket against the cabinet wall and drill these self-tarp screws.
Installation about Eapele Sink Repair Kit
Tighten the hexagon socket screw at the bottom with L shaped wrench until the sink raises and begins to compress the sealant.
Installation about Eapele Sink Repair Kit
Tighten the side bolt for max load bearing.
Note! Wait over night for sealant to cure before using the sink.
Step 1
Step 2
Step 3
Step 4
Upgraded Stainless Steel Screws
In the first batch of packages, customers claimed that the screws were fragile. Now we replace the broken screws with higher strength stainless steel screws.
Max Support to 680lbs
Package includes 5pcs brackets. Strong enough for a double bowl sink.
45° Swivel Angle
The angle of bracket is adjustable, it will swivel to any desired angle.
Repair your falling sink in under 1 hour, save your time and money!