Tire Pressure Sensor is Important. How Important?

TPMS stands for "Tire Pressure Monitoring System". Each car tire is equipped with a TPMS sensor connected to the tire valve, which is mainly used to automatically monitor the real-time tire pressure, temperature, and acceleration information and alarm drivers stay on top of tire leaks and low pressure, making them aware of any issues before leading to much more severe issues such as:

the increased risk of tire blow-out / shorter lifespan of tires / faster tire wear-out / poor driving experience / bad fuel economy

Whereas, all these above problems can be effectively avoided if you use this Autel MX-Sensor to monitor tire pressure regularly. This Autel TPMS sensor has the following characteristics and performs the same functions as the OEM sensors but is more affordable:

• 2-in-1 frequency: 315MHZ+433MHz.
• 2 interchangeable valve: metal & rubber.
• 5-Year battery life & 98% of coverage.
• 100% copy the original ID.
• Programmable press-in MX-Sensors, easy to install.
• Measure the tire pressure in the car tire.
• Measure the temperature inside the car tire.
• Measure the acceleration in the car tire.
• Meet SAE J1205/J1206 standards.

Specification

• Storage Temperature -40°C to +105°C（Recommended ≤35℃）
• Operating Humidity ≤90%
• Operating Frequency 2.4G (Bluetooth)
• Pressure Monitoring Range 0-800Kpa
• Pressure Reading Accuracy ±10Kpa
• Temperature Reading Range -40°C to +105°C
• Temperature Reading Accuracy ±5°C
• G Sensor Reading Accuracy ±15%
• Transmission Power 5dbm
• Battery 550mAh
• Dimension（W x H x D） 63.6 x 33.5 x 22.62
• Weight（Without Value） 23.8g

Autel TPS218 - Dual Frequency 315MHz+433MHz Programmable TPMS Sensor

The Main highlights for Autel MX-Sensors:

• 2 in 1 TPMS Sensor: Combining 2 frequencies (315MHz & 433MHz) into Autel MX-Sensors. The common sensors on the market have only one frequency.
• Metal & Rubber Valves: Exclusive press release valve provides the interchangeable rubber & metal valve stems for easy removal and replacement by hand without a tool.
• 100% ID Clone-able: Autel MX-Sensors can 100% copy the original sensor ID and replace the original one in the same position without relearning procedure when programmed.
• Programmable Sensors: All the Autel MX-Sensors can be activated/programmed/relearned with Autel TPMS tools (TS408/TS508/TS601/ITS600/MK808TS/MP808TS/etc.). Performing the same functionality as the OEM sensors but more cost-effective.
• Wireless Programming: Thanks to the powerful signal strength, up to 20 MX-Sensors can be wirelessly programmed simultaneously even already mounted to the wheel.
• 99% Vehicle Coverage: Universal Autel sensors cover 98% of vehicle models. No more need to stock a large number of sensors for various vehicles.
• 5 Year Battery Life: 12g Lower MX-Sensor offers longer battery life than most sensors on the market.
• Quality Control: Tested & certified to meet SAE J1205/J1206 standards. Each sensor owns a series number for quality control and takes no charge from manufacturing defects for a period of 24 months or 24,000 miles.

User-friendly Design & Easy Installation Steps

Fast to Install the Autel MX-Sensors and Quickly Replace the Original Sensors

1. Loosen The Tire: Remove the valve cap and core and deflate the tire.
2. Demount The Tire: Clamp the tire onto the tire changer, and adjust it to the right position to dismount the bead.
3. Dismount The Original Sensor: Remove its cap, screw nut, and washer from the valve stem, and then remove the sensor assembly from the rim.
4. Assemble The New Autel MX-Sensors to The Wheel.
5. Mount The Tire Bead into The Wheel

When the programmed Autel MX-Sensors work well with the TPMS system, it brings great benefits to you.

• Monitor whether the tires are properly inflated or not on the vehicles dashboard.
• Proper tire pressure inflation optimizes tire performance

1. optimize the tires traction
2. shorten the braking distance
3. improve the fuel economy
4. slow the wear of the tread area

99% of Worldwide Vehicle Coverage, No Longer Pay More for Sensor Replacement

Good news! The newly released Autel TPS218 MX-Sensors feature two types of valves (metal & rubber ) and two frequencies (315MHz & 433MHz ), which can better fit for needs of DIYers, tire dealers, and repair shops. Thanks to its 98% of mainstream vehicle coverage & effective cost, this Autel TPMS sensors can perfectly replace 98% of OE-level sensors and save at least half of the bucks for you.

• America: Compatible with Ford, Lincoln, Chrysler, Dodge, Jeep, GM, Cadillac, Chevrolet, Buick, GMC, etc.
• Asia: Compatible with Suzuki, Mazda, Lexus, Hyundai, Infiniti, Nissan, Mitsubishi, etc.
• Europe: Compatible with BMW, Bentley, Bugatti, VW, Skoda, Porsche, Opel, Fiat, Peugeot, Citroen, Volvo, Mini, Saab, Land Rover, Renault, etc.

COMPLETE TPMS SOLUTION

Autel provides complete TPMS solution from diagnostics to TPMS programming. MX-Sensor can be programmed with Autel TPMS tools such as:

• Autel MaxiTPMS TS408S, TS501, TS508, TS508WF, TS601, TS608, ITS600 (E), ITS600 Pro
• Autel MaxiCOM MK808TS/ MK808S-TS/ MK808Z-TS, Autel MaxiCheck MX808TS/ MX808S-TS
• Autel MaxiPRO MP808TS/ MP808S-TS/ MP808Z-TS
• Autel MaxiPRO MP900-TS/ Autel MaxiCOM MK900TS
• Autel MaxiSys MS906TS/MS906 Pro-TS
• Autel MaxiCOM MK906 Pro-TS

Note: It’s suggested to programming the sensor before installation.