Specification:
Material: Plastic
Weight: 190g/6.7oz
DC Power Supply: 7-24V
Industrial grade working environment: -40℃ ~ +8℃
Relay output, no voltage or current output. Maximum load, DC 5A, AC 10A, maximum voltage 250V.
COM1 first relay common terminal, NO1 first relay normally open, NC1 second relay normally closed terminal. COM2, NO2, NC2 are the second way, the function is the same as above.
Reset, used to restore the factory equipment. In the case of no power on, stick a toothpick or a point through the reset hole and connect it to the power supply. After the LED light is on, release the toothpick and restore the IP of the factory equipment to 192.168.0.105. If you want to upgrade software, be sure to upgrade in the reset state. After the reset is successful, the LED light flashes (twice per second). If you want the controller to work normally, you need to power it again. The LED is in a slow flash state (flash every second).
Order description:
Commands are sent and received in character form.
Open the first relay: send on1; return on1
Open the second relay: send on2; return on2
Off the first relay: send off1; return off1
Close the second circuit relay: send off2; return off2
Read the state of the first relay: send read1; return on1, (indicates that the relay is open, and if return: off1 indicates that the relay is closed)
Read the state of the relay in the second circuit: send read2; return on2 (indicates that the relay is open, and if return: off2 indicates that the relay is closed)
Package List:
1 x Ethernet Controller Module