Feature

●[Widely Application and Low Cost] 1/2” ideal clean cutting and 3/4” severance cutting under 220/240V and 2/5" severance cutting under 110/120V,air pressure 60PSI recommendation.this Plasma Cutter available for cutting most metals: stainless steel,alloy,aluminum,mild steel,carbon steel; widely used for automotive, ducting work, repair/maintenance,metal processing,manufacture
●[SEE WHAT OUR CUSTOMER SAYS] I tried it on 120v with the air pressure turned way down on a piece of 1/8 angle iron the pilot arc worked as it should and it went through it like it wasnt even there. Next thing I tried it on was some roughly 3/8 wall tubing I needed to cut and notch for the safety cage on my figure 8 car.
●[Generator Supported] This Plasma Cutting machine works well with a generator,but we suggest a 5000W above generator and 30A breaker needed for 220V,50A breaker for 110V
●[Blowing Back] Pre-made 3 seconds of blowing time after you release the torch,to cool down the torch head and consumables.[110/220V Input ]Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz)
●[Warranty] Buy this plasma cutter with confidence as Reboot offers 1-year limited warranty and free consumables guarantee,besides,you will get a local supports for any assistance

[RBC5000D]




[Non-Touch]





Description

Reboot plasma cutterReboot plasma cutter

Reboot RBC5000D Plasma Cutter 50AMP Machine

The Reboot RBC-5000D 50A plasma cutter features a high-frequency arc starting mode, efficiently cuts through rough, painted, and rusty surfaces and produces minimal slags. Equipped with a LED display, you can read all data and functions clearly and easily without taking off your helmet. The post-time function can be adjusted, extending consumable life.

This plasma cutter machine is very easy to operate and features 110/220V dual voltage, you can see the input voltage clearly on the LED display. Its super lightweight and portable.

We will take each and every action to prevent you from bearing any loss as we value our customers investment and trust more than anything else.

Messages sent in anytime will be responded to as quickly as possible.As our main priority is your satisfaction.

Safety ProtectionSafety Protection

Cutting ThicknessCutting Thickness

Suitable for Wide Range of MaterialsSuitable for Wide Range of Materials

Safety Protection

The machine is equipped with over-heat, over-current, over-load and over-voltage protection. It also has an automatic cooling fan and vents to discharge the heat generated effectively.

Cutting Thickness

Max Cutting thickness: 4/5 mild steel severance

Its perfect for both demanding industries and home or hobby use.

Suitable for Wide Range of Materials

This plasma cutter is widely used for cutting alloy steel, stainless steel, copper, mild steel and other color metal materials.

connectionconnection

How to connect the air compressor:

  • Seal the connection of the copper gas fitting and the “IN” terminal and “OUT” terminals.
  • Connect the regulator seal to the installation place of the regulator.
  • Install the regulator bracket to the two screws at the top of the back of the machine.
  • Remove the mounting ring from the top of the regulator and install the regulator to the mounting bracket and re-attach with the ring.
  • Release the gas valve, modulate the pressure of the gas to stipulated pressure and press the button.
  • The gas pressure is 4 times normal atmospheric pressure.
  • In case that the water-filtering bottle is full of water,remove the water.

welding machinewelding machine

  • Input voltage: 110/220V±15%
  • Current range: 15A-50A
  • Insulation Class: F
  • No Load: 280V
  • Generator Input: 4.8 KVA
  • Rated Duty Cycle: 80% at 50A, 100% at 35A
  • Max Cutting thickness: 16mm mild steel severance
  • Air Pressure: 60-70PSI

welding machinewelding machine

  • Please ensure that the generator is not less than 6000w.
  • It is recommended to choose 50A circuit breaker protection when your power supply voltage is 110V, and 30A circuit breaker protection when 220V.
  • Dormant fan: When the machine is over-current or overheated, the machine stops working, the internal protection mechanism is triggered, and the fan will continue to work until the machine cools down.

RBC5000DL RBC6000 RBC5000D
RBC5000DL RBC6000 RBC5000D
volt dual volt 220v dual volt
current 50A 60A 50A
Function Plasma Cutter Non Touch Plasma Cutting Machine Plasma Cutting Machine
Welding Capacity Clean: 1/2"(12mm) Max: 3/4"(19mm) Clean: 1/2" (10mm) Max: 3/4" (20 mm) Clean: 1/2"(12mm) Max: 3/4"(19mm)
Frequency high frequency high frequency high frequency
Duty cycle 100% at 40A 100% at 40A 100% at 40A
Cutting material Metal/steel/iron/copper Metal/steel/iron/copper Metal/steel/iron/copper
Gas Required Air Air Air
Plug type 3 prong 220V 50A 3 prong 220V 50A 3 prong 220V 50A
US Based Customer Support ? ? ?
100% duty cycle welder 210A powerful mig welder mig welder 110v flux core welder Reboot mig welder 220v 135a
100% duty cycle welder 210A powerful mig welder 4-in-1 mig welder 1450 110v flux core welder 220v flux core welder
fit for beginner experienced home and business outdoor inside
volt 220v 110/220v 220v 110v 220v
type 5-in-1 welder machine 5-in-1 welder machine 4-in-1 welder machine flux core only flux core only
Output AMPs 30-150A 31-210A 20 - 145A 45 - 135A 35-135A
Welding thickness 1-8mm 1-8mm 1-5mm 1-5mm 1-5mm
Duty cycle 100% at 150A 100% at 150A 60% at 135A 20% at 90A 60% at 135A
Mig Gas/Gasless ? ? ? Mig Gasless Mig Gasless
Welding material Metal/steel/iron/copper Metal/steel/iron/copper Metal/steel/iron/copper Metal/steel/iron/copper Metal/steel/iron/copper
Plug type 3 prong 220V 50A 3 prong 220V 50A 3 prong 220V 50A 3 prong 110V 15A 3 prong 220V 50A
US Based Customer Support ? ? ? ? ?