Sensor Installation
1.Unscrew the valve dustproof cap then screw on the hexagonal nut;
2.Screw on the sensor;
3.Reversely tighten up the hexagonal nut to the sensor with the spanner;
4.Check the air leak using soapy water.
Tips:
1.Please open the display first, then install 4 sensors. When the driving speed reaches 9MPH or 15KPH, the display will automatically update the tire pressure data.
2. If one of the sensors does not work properly after the first installation, reinstall and wait a while before proceeding.
3. Please test the tire pressure while the car is driving. If the car stops, the TPMS reading is incorrect.