Feature
●??Solar Ccharging and USB Charging?? Tymate Tire Pressure Monitoring System M7-3-6 has two charging methods. Tymate tire pressure monitoring system has a solar lithium battery panel that can automatically charge in the sun for continuous battery life, and can be supplemented by Micro USB charging when there is no sunlight. Two charging methods make the Tymate Tire Pressure Monitoring System M7-3 with 6 External Tpms Sensor for extra long standby time.
●??Five Alarm Types & Personalized Alarm Values ????Tymate tire pressure monitoring system M7-3-6 is equipped with five alarm modes (high pressure, low pressure, high temperature, rapid air leakage, sensor low battery alarm), and timely reports to the The driver provides abnormal tire conditions. After pairing, the systme will automatically set the current pressure when installed the sensor as reference pressure (Alarming Range is +25% PSI to -15% PSI of Reference Pressure).
●?? Repeater for Extended Range & Sensors for Precise Sensing ?? Tymate Tire Pressure Monitoring System M7-3-6 has low sensor power consumption and long battery life (up to 2 years). Small size, light weight, high tire pressure sensing accuracy (error range not more than 3 PSI), and easy installation. It is dust and water resistant and wind and snow resistant. Repeaters can extend the sensing range beyond 45 feet.
●??Automatic Backlight and Real-time Monitoring ?? Tymate tire pressure monitoring system M7-3-6 has a smart LCD screen, which can automatically display backlight in low light or strong light environment, and display data clearly. Real-time monitoring and real-time display of data, the data of 6 sensors are displayed at the same time, allowing the driver to know the tire pressure and temperature of all tires at any time.
●??Power Saving Mode and Vibration Wake Up?? When the car is stationary for 10 minutes without charging, the Tymate tire pressure monitoring system M7-3-6 will automatically enter the power saving mode, the display will be turned off, and no sensor data will be accepted . Press any key or vibrate the display, and the Tymate tire pressure monitoring system M7-3 with 6 External Tpms Sensor will return to the standby state again.
[6-Sensors]
[4-Sensors]
Description
Note Before Usage:
1. Tymates tpms does not require any complicated operations from you, you only need to turn on the monitor first, and then install the sensor on the tire at the corresponding position. You do not need to manually program, all products have been programmed before leaving the factory.
2.Please turn on the monitor before installing the sensor on the tire. Please do not install the sensor on the tire before turning on the monitor. This operation may cause problems such as sensor data not being displayed and the monitor showing garbled characters. If you have installed the sensor on the tire first, please start your vehicle immediately and observe whether there is data displayed after 5-10 minutes. If there is still no data displayed, please remove the sensor and let it rest for 10 minutes before proceeding to the correct installation sequence.
3.If you find that your sensors data is not displayed or displayed intermittently during use, it may be that the sensors wireless signal transmission is interfered by objects and electromagnetic interference. You can solve this problem by moving the display away from the interference source, such as moving the monitor away from the GPS navigator and closer to the driving position. If the problem persists after trying the above suggestions, you can use our repeater that extends the signal transmission distance and eliminates interference.
4.If a tire blowout puncture occurs: tpms could not avoid the puncture caused by sharp objects or damaged tires. Because tpms can only monitor the air pressure and temperature over a period of time, but cannot monitor instantaneous changes. So it is only suitable for avoiding tire abnormalities caused by changes in air pressure or temperature, which occur slowly, not instantaneously.
Tymate recommends: Do a comprehensive tire inspection for at least one month and ask your tire technician to replace your faulty tire in time.
|
|
|
|
|---|---|---|
|
|
|
|
|
|
|
|
|
|---|---|---|---|---|
| M7-3-6 model | CL205 model | M12-3 Black model | M7-3 model | |
| Number of Sensors | 6 Sensors+Repeater | 4 Sensors | 4 Sensors | 4 Sensors |
| Charging Method | Solar Power / Cigarette Lighter / TypeC-USB | Cigarette Lighter | Solar Power / Cigarette Lighter / TypeC-USB | Solar Power / Cigarette Lighter / TypeC-USB |
| Features | Auto Solar Charge/ 5 Alarms / User-set Alarm / Auto Backlight / Sleep & Awake Mode / Advanced Sensor ＆ repeater / Tire Position Exchange | Full-Color Screen Design / 6 Alarms / User-set Alarm / Car Cigarette Lighter Charge / Low Power Consumption Sensor / Simple Installation and Setup | Auto Solar Charge / 5 Alarms / User-set Alarm / Auto Backlight / Sleep & Awake Mode / Low Power Consumption Sensor / Tire Position Exchange | Auto Solar Charge / 5 Alarms / User-set Alarm / Auto Backlight / Sleep & Awake Mode / Low Power Consumption Sensor / Tire Position Exchange |
| Tire Pressure Monitoring Range | 0-10.0 Bar / 0-145 PSI | 0-6.0 Bar / 0-87 PSI | 0-10.0 Bar / 0-145 PSI | 0-10.0 Bar / 0-145 PSI |
| Tire Pressure Alarm Setting Range | Automatically Setting the Current Pressure When installed Sensor as Reference Pressure (Alarming Range is +25% PSI to -15% PSI of Reference Pressure) | 0.8-6.0 Bar / 12-87 PSI | Automatically Setting the Current Pressure When installed Sensor as Reference Pressure (Alarming Range is +25% PSI to -15% PSI of Reference Pressure) | Automatically Setting the Current Pressure When installed Sensor as Reference Pressure (Alarming Range is +25% PSI to -15% PSI of Reference Pressure) |
| Tire Temperature Monitoring System | -4℉~185℉ | -20℃~85℃ | -4℉~185℉ | -4℉~185℉ |
| Tire Temperature Alarm Setting Range | ≥158℉ | 25℃~80℃ | ≥158℉ | ≥158℉ |
| Temperature Unit | ℉/℃ | ℃ | ℉/℃ | ℉/℃ |
| Voltage | DC 12~24V | DC 12~24V | DC 12~24V | DC 12~24V |