Feature

●The Third Hand Binding Folder Clip makes it easier for you to create binding.  Its like having a 3rd hand to fold the binding in half while you iron!
●The Third hand is adjustable so it fits a standard ironing board as well as thinner boards.  No tools necessary, just loosen the wing nut, slide the Third Hand into place and turn the wing nut to secure it in place.  (It will not be super tight because you are going to slide the tool off of your ironing board for easier loading of the fabric.)
●To create your binding, slide the tool off your ironing board and insert a 2 1/2" (or any of the other width choices) strip of fabric into the Third Hand Binding Folder Tool.   There is a slot on the top to allow you to use a pin to help pull the fabric through if necessary. Slide the tool back onto the side of your ironing surface. Pull the fabric out about 6" and straighten the edges then press with your iron. Turn the iron tip next to the tool so you can hold the iron with one hand and pull the fabric out with the second.  Pull slowly so the iron has time to do its magic and press the seam for you.
●I roll the binding onto the Binding Wheel as Im ironing it.  Then I can neatly store the binding until Im ready to stitch it to my project.
●The Third Hand Binding Folder Clip is now available in eight sizes:  4, 3.5", 3", 2.75", 2.5", 2.25", 2", and 1.125"  and a variety of colors
●SEE CONVERSION CHART PICTURE FOR STARTING FABRIC STRIP WIDTH TO ENDING FOLDED FABRIC SIZE

[Lilac Binding Wheel]




[Pink 2.5  ]




[Purple Binding Wheel Clamp]




[Lilac Binding Wheel Clamp]




[Purple 2.25  ]




[Light Blue Binding Wheel Clamp]




[Purple Binding Wheel]




[Lilac 2.5  ]




[Pink Binding Wheel]




[Pink Wheel Binding Clamp]




[Light Blue Binding Wheel]




[Light Blue 2.25  ]





Description

The goal of Purple Hobbies is to share my passions with other makers.  We are a small, family owned and operated business.  All designs are created by myself and my two sons with patents for both the BladeSaver Thread Cutter and the Magnetic Pin Cup designs. We have lots of hobbies, and the one thing they all have in common is that they can be improved with custom 3D printed objects.  See how 3D printing can improve your hobbies and your daily life! All items are original designs created with lots of feedback from family and friends. We use SolidWorks to create the models and then we print them on a "farm" of Ultimaker printers.