[Grey]
This model is mainly used for checking the car is repainted or not. Not for high accuracy thickness checking. If you need higher resolution gauge, please check our other model Reenwee YNB555
Measurement range | 0~1.80mm/0~71.0mil |
Resolution | 0.05mm/2mil |
Measurement error | ±0.1mm |
Minimum diameter of substrate | φ50mm |
Minimum thickness of substrate | 0.5mm |
Work temperature range | 18~30℃ |
Work humidity range | 10~80%RH |
Battery | CR2032*2 |
Outline Dimension | 35.9*83.3*22mm |
Weight | 63.98g(without batteries) |
|
|
|
---|---|---|
Original PaintIn most cases, when the result is less than 0.2mm(8mil), its original painting. |
RepaintIn most cases, when the result is over 0.2mm(8mil), its repainted. |
Over RangeWhen the result is over 1.8mm(71mil), it shows OL, which means over range. |
![]() |
![]() |
|
---|---|---|
YNB100 | YT-111 | |
Resolution | 0.05mm/2mil | (0.1μm(<100μm),1μm(≥100μm)) /0.001mm/0.1mil |
Unit | mm/mil | μm/mil/mm |
Measure Rnage | 0~1.80mm/0~71.0mil | 0~1500μm/0~59mil/0~1.5mm |
Backlight Display | ? | ? |
Sensor Housing Material | Plastic | Steel |
Zinc Option | ? | |
Auto detect substrate ( Fe/NFe) | Only Iron/Aluminum/Car Steel | ? |
Battery Type | 2* CR2032 | 2* AAA |
Calibration | No Need | Yes |