Feature:
1. Suitable Models: Our film is suitable for Photon X, for Elegoo V1, for Elegoo V2, for Elegoo V3, for LD 003, for Phrozen XL, for Phrozen Make XL, for Phrozen XL 4K, for Epax, for Epax 8.9K Mono, for Qidi S Box, for Smart Kumitsu KL9 and so on.
2. Accurate Cutting: Our release films are accurately cut, with high light transmission and no burrs. Flat and clean, longer service life.
3. FEP and Resin Material: Our release film is made of FEP optical grade HD material and photosensitive resin, which is colorless, odorless and HD transparent.
4. Strong Toughness: This release film has strong toughness, hydrophobic and oleophobic, non adhesive resin, and easy to clean.
5. Easy Release: This release film has light and stable release force, which can easily release the film and is durable.
Specification:
Item Type: Release Film
Material: Photosensitive Resin, FEP
Size: Approx. 280 x 200 x 0.15mm / 11.02 x 7.87 x 0.01in
Right Angle Tear Strength: ≥5Mpa
Tensile Strength: ≥14Mpa
Light Transmission Rate: 95%
Applicable: For Photon X, for Elegoo V1, for Elegoo V2, for Elegoo V3, for LD 003, for Phrozen XL, for Phrozen Make XL, for Phrozen XL 4K, for Epax, for Epax 8.9K Mono, for Qidi S Box, for Smart Kumitsu KL9 and so on.
How to Use:
Installation Steps.
1. First remove the 8 screws at the bottom of the trough.
2. Then remove the 24 screws inside the steel .
3. Then place the release film between the two steel rings.
4. Finally, put the installed steel back into the trough.
Package List:
5 x LCD Release Film
Note:
1. Tension: This film is suitable for all desktop type light curing machines (taut film tray structure), common screw snap design. The degree of tension of the film on the material tray must affect your demoulding effect, please combine the size of the center of your material tray will be the appropriate film tension taut on the material tray, not too loose or too