Feature(may vary by option.)

●Bi-metal type, HSS M42 grade, 64-1/2" long, 1/2" wide, 0.025" thick, 14/18tpi
●Perfect for cutting soft ferrous metal only
●14/18tpi is suitable for cutting thin pipe tube profiles etc, do not cut any non-ferrous metal like aluminum etc.
●14/18tpi is varied teeth profile
●Suits all bandsaws which use 64-1/2" long, 1/2" wide bandsaw blade

[18TPI]





Description

Imachinist New Band Saw Blade 64-1/2" X 1/2" X 0.025" X 14/18tpi

Blade Length: 64-1/2" or 64.5"

Blade Width: 1/2" or 13 mm

Blade Thickness: 0.025" or 0.65 mm

Blade Teeth: 14/18tpi (variable pitch)

Teeth Form: null raker

Include: 1 piece of 64-1/2" x 1/2" x 0.025" x 14/18tpi band saw blade

Suitable: for ferrous thin tubing, sheet, plate, profile etc

64 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 64 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 64 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 64 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 56 1 2 in 56.5 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1435 64 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638
Click here for 64-1/2", 6/10TPI Click here for 64-1/2", 8/12TPI Click here for 64-1/2", 10/14TPI Click here for 64-1/2", 12/16TPI Click here for 64-1/2", 14TPI Click here for 64-1/2", 24TPI
Blade Length 64.5 Inch 64.5 Inch 64.5 Inch 64.5 Inch 64.5 Inch 64.5 Inch
Blade Width 0.5 Inch 0.5 Inch 0.5 Inch 0.5 Inch 0.5 Inch 0.5 Inch
Blade Thickness 0.025 Inch 0.025 Inch 0.025 Inch 0.025 Inch 0.025 Inch 0.025 Inch
Blade Teeth 6/10TPI 8/12TPI 10/14TPI 12/16TPI 14TPI 24TPI
Pitch variable pitch variable pitch variable pitch variable pitch constant pitch constant pitch
Suitable for aluminum, copper, brass etc and other non-ferrous metal ferrous thick tubing, profile, sheet, plate etc ferrous thick tubing, profile, sheet, plate etc ferrous thin tubing, sheet, plate, profile etc general purpose ferrous thin tubing, plate, sheet etc, dont cut non-ferrous metal, like aluminum etc
SKU S641212610 S641212812 S6412121014 S6412121216 S64514 S64121224

64 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 164064 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 1640

64 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 164064 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 1640

64 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 164064 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 1640

64 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 164064 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 1640

Metalworking Type

Bi-metal blade is designed for metalworking, ideal for metalworking craftman, blacksmith, mechanic etc.

Compatibility

Accurate length with high performance, compatible with most bandsaws with more choices on teeth pitch.

Ideal DIY Tools

Bi-metal type, M42 grade, 8% cobalt with 2% tungsten, much more fatigue resistant and durable on metal.

Blade Life

Spring steel backer strengthens blade life, hardened edges to cut metal straightly with ease, blade works with high performance.

Blade Teeth Selection Advice and Welding Joint Comparison

64 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 164064 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 1640

How to Improve Life

  • Blade installation is the first step, make sure teeth is shown outside the guide, and blade strip is clamped tightly inside the guide.
  • Teeth direction should be the same with the direction of wheel rotation, twist the blade from inside to outside if teeth direction is opposite.
  • Running-in is required when blade cuts metal for the first time. Its important for blade life. During running-in, cutting speed should be 1/3 of normal speed, feed should be 1/4 of normal feed. Usually, after the blade cuts the first several pieces, like 5-10 pieces, adjust cutting speed and feed gradually to normal speed according relative parameters and your metal.
  • Blade tension will be different for differnt wide blades, as time goes on, blade tension will be reduced by the bandsaw and blade stretch, make sure the blade is correct tension, our recommended blade tension is 300N/mm2.
  • Coolant will be useful to cool and lubricate blade and teeth during cutting, better coolant could avoid overheat on the teeth of the blade, and reduce friction between the blade and the metal you cut.
  • Teeth selection is also important, here are our experience:

  1. big variable teeths (like 3/4TPI, 4/6TPI, 5/8TPI) are for cutting ferrous solid rod with big diameter;
  2. big constant teeth (like 6TPI) is for cutting ferrous solid rod with small diameter;
  3. big variable teeth (like 6/10TPI) is for cutting aluminum, copper, brass etc and other non-ferrous metal;
  4. middle variable teeths (like 8/12TPI, 10/14TPI) are for ferrous thick tubing, profile, sheet, plate etc;
  5. small constant teeth (14TPI) is for general purpose;
  6. small variable teeths (like 12/16TPI, 14/18TPI) is for ferrous thin tubing, sheet, plate, profile etc;
  7. small constant teeth (24TPI) is for ferrous thin tubing, plate, sheet etc, dont cut non-ferrous metal, like aluminum etc.

64 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 164064 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 1640

64 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 164064 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 1640

bandsaw blade packagebandsaw blade package

Welding Joint

We weld blades with high performance welding machine to make sure welding joint looks perfect.

Teeth Direction

Default teeth direction is rightward, if you want leftward direction, please twist the blade from inside to outside.

Original Package

Brand new with original package for this blade with tips behind blade pacakge to help customers.

64 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 164064 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 1640

Cold Rolling

We use imported cold rolling machine to cold roll the band saw blade strip

64 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 164064 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 1640

Cold Rolling

64 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 164064 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 1640

Milling

64 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 164064 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 1640

Heat Treatment

64 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 164064 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 1640

Welding