Feature

●Replacement wrist gasket made from high-quality Latex rubber.Sold as a pair
●New wrist seals will replaced your over stretched, worn out, cracked, gummy or torn gaskets,economical replacement part can have your drysuit working well!
●Replacing deteriorated or torn gaskets yourself saves you time and money ,Our seals are designed to keep you dry.Feaures fresh water salt water resistant,Polytex UV resistant seals
●Can be trimmed to fit.Measure your wrist circumference, lightly wrap a measuring tape or string around slimmest part of wrist -- dont pull tight,Trimming the seals should be done 1-5mm (1/16th of an inch) at a time.If the size of the joint between the drysuit cuffs and the latex wrist seals is not the same, cut a piece of cloth can be attached to realize the connection between them,if you want to get tapes for replacement,please keep move on my shop!
●FULL CUSTOMER SUPPORT - Our customer support team is available 24/7 to answer any question and solve any situation. If you’re not satisfied with your new drysuit seals-wrist gasket,we’ll happily give your money back


Description

Material：High quality latex Rubber
-Usage：Replace a leaky seal to keep warm, dry and kayaking rafting surfing SUP dry suit.
Question and answer:
My seals are too tight - help?!
Our seals are designed to keep you dry not by being tight but by sitting smooth and flush against your skin. At no time should your seals be cutting off circulation or breathing! If you feel your seals are too tight, you can easily adjust their size. However, 1st be sure that you’ve got the seal on such that it is smooth and flush against your skin and not folded back on itself as this will cause it to pinch.
If you still need to adjust your seals, we suggest that you 1st consider taking wine or pop bottles and stretching the wrist and ankle seals over these overnight. This will often relax the rubber significantly.
As a last resort measure your wrist circumference, lightly wrap a measuring tape or string around slimmest part of wrist -- dont pull tight,you can according to trim line trim your seals to fit . Trimming the seals should be done 1-5mm (1/16th of an inch) at a time.
Best way to maintain my seals?
Rinse wrist seals by fresh water after use,Avoid sunlight exposure and store in a cool environment.