[Rainbow S]
[Rainbow Lite]
Fully Cutomizable Wired Gaming Controller with Aurora RGB Lighting for PC & SWITCH
Equipped with optimized joystick algorithm, pro-grade accuracy with 0 deadzone.
Activate Hair Trigger Mode to greatly reduce travel distance, enabling an ultra-fast rate of fire.
Unleash greater control and a more personalized play style with 2 extra remappable buttons.
Set macro, turbo, and button remapping to get the competitive edge.
For greater immersion with stronger vibration, 3 levels of vibration switchable from strong to weak.
CONNECTION
Rainbow Lite is a wired controller, so you only need to use a Type-c data cable to connect the controller to the console.
Note: This controller supports Xinput and Switch modes. After connecting with the console, you need to switch to the correct mode. The default setting is Xinput.
Steam: To connect to Steam, you need to check the "Xbox Configuration Support" in the "Settings - Controller -GENERAL CONTROLLER SETTINGS" of Steam. Otherwise, it may cause unrecognized issues within the game.
Switch: After connecting the Switch, you need to turn on "System Settings - Controllers and Sensors - Pro Controller Wired Communication".
MODE SWITCH
Rainbow Lite supports two modes: Xinput and Switch. After connecting, you need to switch to the corresponding mode to use it normally.
The setting method is as follows:
Hold the B+HOME button for 3 seconds until the indicator turns green, which means switching to Xinput mode;
Hold the A+HOME button for 3 seconds until the indicator turns red, which means switching to Switch mode.
REMAP
Remap: Press FN + (M1/M2), and the indicator will breathe in green, indicating that it has entered the remapping mode; Then press the front button that needs to be mapped, and the indicator will flash twice in green, indicating that the key mapping is successful.
Clear key value: Press and hold the "button need to cancel the key mapping(M1/M2)", and double-click FN, and the indicator will flash twice in green, indicating that the cancellation is successful.
TURBO
Set TURBO: Hold FN + the "key need to be set", the indicator will flash in orange, which means it is successfully turned on. When the TURBO is opened, the 2nd and 3rd LED lights will flash according to the TURBO frequency.
Cancel TURBO: Hold the "button need to cancel TURBO" and double-click the FN button, the indicator will flash twice in orange, which means the cancellation is successful.
TURBO frequency: Hold FN + ← to cycle between 5/s, 10/s, and 20/s three frequencies, the default is 5/s.
MACRO RECORDING
MACRO recording: Hold FN + (M1/M2) for 3 seconds, the indicator will breathe in red, indicating that it has entered the MACRO recording mode. Press the buttons of the controller to record the MACRO. After finishing the recording, clicks FN once to end the MACRO recording. The indicator will flash twice in red.
Clear MACRO: Hold the "button need to cancel the macro (M1/M2)" and double-click, the indicator will flash twice in red, indicating that the cancellation is successful.
DEADZONE OF JOYSTICK
Hold FN + the left or right joysticks down (LS/RS) to switch between 0/10 for the deadzone of the left or right joysticks respectively.
HAIR TRIGGER
On/Off Hair Trigger: Hold the Triangle button + Trigger (LT/RT), the indicator will flash twice in cyan indicating that the Hair Trigger is successfully turned on. Hold the Triangle button + Trigger (LT/RT) the indicator will flash twice in cyan again indicating that Hair Trigger is successfully turned off.
VIBRATION ADJUSTMENT
Press FN + →, and the vibration of the trigger motor can be cyclically switched between strong, medium, weak, and off.
LIGHT EFFECT
Double-click the FN button to switch light effects or turn off the light.
RESET
To reset the Rainbow Lite controller, press and hold its Home button for 10 seconds until it vibrates.