Backup Camera Wiring
1. Camera Power Cable: Red and Black.
---Red wire to car reverse light positive, black to reverse light negative.
2. Camera RCA Cable: Yellow port.
---Insert it on the radio rear input cable. Its a single cable with yellow port with label ("REVERSE/BACK/REAR CAMERA")
3. Trigger Cable
3.1 The trigger cable on car radio: the cable with label named "REVERSE/BACK"
There are two short red wires next to the cameras RCA port.
3.2 near the radio: the red wire 1: connects to 3.1 cable
3.3 near the camera: the red wire 2: connects to cars rear light positive.
Backup Caremra Specifications:
Image Sensors: 1/4" color Sensor
TV System: NTSC default & PAL request
Video Color: Colorful
Waterproof Class: IP 66
Effective Pixels: 580X540
Lens Angle: 170°
Storage Temperature: -30°C+80°C
Working Power: DC12V
Current Consumption: 90mA Max
Herere some phenomenon buyers usually meet:
1. When pull the reverse gear, camera lights, but nothing change on the screen. When click AV-in icon, I can see camera image.
Reason: Incorrect wire of both RCA and trigger cable
2. When pull the reverse gear, camera lights, the screen shows blue with "no signal" or black screen. When click av-in icon, I can see camera image.
Reason: Incorrectly inserting the RCA port to video input port, instead of CAMIN port.
3. When pull the reverse gear, camera lights, nothing change on the screen. When click AV-in icon, i cannot see anyghing.
Reason: Incorrect wire of the trigger cable.