Feature
●?【Automotive Multimeter】Measure AC DC Amperage to 20A, AC DC Volt to 750V~1000V, AC DC Ohm to 60MΩ, Capacitance to 60mF, Temp -4~1832℉, Frequency 9.999MHz, Duty Cycle, 3/4/5/6/8 Cylinder Switchable, 0.1ms~10.0 ms pules width, 600~12000RPM Tachometer and Dwell Test. 【 BTMETER BT-705A Inductive Clamp for RPM measurement is NOT included 】
●?【For Mechanics and DIYers】High accuracy 6000 counts multi-tester features with PEAK Hold on MAX/MIN. Diode & Continuity Test, NCV and AC True RMS, ℃/℉ switchable. With automatic zero adjust and overload protection on all ranges, 10 MΩ impedance.
●?【Large LCD Display】This voltmeter using the words 20mm, 3.0 inch LCD display with Auto backlight sensor makes it convenience for troubleshoot car engine battery and electric problems in dim place. Auto OFF after 15 mins with no operation
●?【Hands Free】Magnetic attachment on metal surface, Hanger, Kickstand to set your hands free, and auto backlight, led light in the knob allows your see the range and measurement clearly, especially when working under your vehicle or in the dark.
●?【Temperature Test】Comes with thermocouple for water tank, Auto Manual Ranging Switchable. Includes zipped carry case which easily holds all the multimeter accessories, life time tech support, and 12 months warranty
Description
ADD Features
- Diode Test
- Data Hold
- Max/ Min display
- Auto Power OFF
- Continuity Buzzer
- 6000 counts True RMS
- Peak Hold in Max/Min
- Temperature Test in ℃/℉
- Non-Contact AC Voltage Detection
- Auto Backlit Screen + Dial indicator light
- AC/DC Current
- AC/DC Voltage
- Resistance
- Capacitance
- Frequency
- Duty Cycle
- Temperature
BTMETER BT-770K 6000 Counts TRMS Automotive TroubleShooter
Digital Multimeter and Engine Analyzer for Automotive Professionals
BT-705A Inductive Pickup Clamp is REQUIRED for RPM measurement from 300RPM~1200RPM. Tests starting and charging, points ignition and fuel delivery systems, and helps locate faulty wiring and components.
Use this DMM with optional BT-605A amp clamp adapter for non-contact AC/DC Current measurement up to 600A
Dwell Angle(4/5/6/8 Cylinder) + ms-Pulse Width & Period test
With Rear Magnet, Extra-large, Auto backlit display can provide easy-reading no matter day and night, or even under your car.
- AC / DC Amperage: 60mA ~ 20A
- DC voltage（DCV）60mV -1000V; AC voltage（ACV）60mV-750V
- Duty cycle: 1.0-99.0％ ; Capacitance: 9.999 nF ~ 999.9 μF
- Resistance: 600 ~ 60M ohms
- Dwell Angle: 0 ~ 45.0º/60.0º/75.0º/90.0º (4/5/6/8 Cylinder)
- Temperature: -20~1000℃, -4~1832℉ (Thermocouple included)
- Pulse Width in Millisecond for Fuel Injectors: 0.1~10ms
- Tach: 600-12000 RPM (BT-705A Inductive Clamp is required)
|
|
|
|
|
|---|---|---|---|
PEAK HOLDThe Peak Hold function captures the peak AC voltage or current in PEAK MAX or PEAK MIN. The meter can capture negative or positive peaks as fast as 1.28 millisecond in duration. |
Optional AccessoriesIt needs work with BTMETER BT-705A induction pick-up lead for RPM measurement. And BT-605A amp clamp adapter can provide DC or AC 600A Current Test (by clamp adapter) . Which are all available in BTMETER Store |
Automotive Diagnostic MultimeterTrouble-shooting car & household electrical problems: tach, dwell, volts, ohms, and diode tests on both 6V and 12V systems. Perfect for testing starting and charging systems, ignition and fuel delivery systems, and helps locate faulty wiring and components. |
Magnetic AttachmentThe back of the 770K is attached with a solid magnet, which can be attached to metal surface, under the car, makes it easy to read anywhere |
|
|
|
|---|---|---|
| BTMETER BT-605A AC DC Current Clamp | BTMETER BT-705A Inductive Signal Pick Up Clamp | |
| Main Function | Measure AC DC Amp up to 600A (by clamp adapter) | Measure tach RPM for vehicle engine |